CHAUVET Intimidator Spot 110 [7/18] Mounting

Page 5 of 16

Intimidator Spot 110 User Manual Rev. 2

Setup

Mounting

Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.

Orientation

The Intimidator Spot 110 may be mounted in any position; however, make sure adequate ventilation is

provided around the product.

Rigging

• Before deciding on a location, always make sure there is easy access to the product for

maintenance and programming.

• Make sure adequate ventilation is provided around the product.

• Make sure that the structure or surface onto which you are mounting the product can support the

product’s weight. (see the Technical Specifications

)

• When mounting the product overhead, always use a safety cable. Mount the product securely to a

rigging point, whether an elevated platform or a truss.

• When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.

• When power linking multiple products, mount the products close enough for power linking cables to

reach.

• The rubber feet also serve as floor supports and allow for surface mounting. When mounting the

product on the floor, make sure that the product and cables are away from people and vehicles.

Mounting Diagram

When using only one mounting clamp with this fixture, you must use a clamp with a

captive bolt to prevent accidental loosening.

Safety Cable

(such as CH-05

from Chauvet)

Mounting Clamp

(such as CLP-15 from Chauvet)

Hanging Bracket

Feet for Floor

Mounting (x4)