Zelmer ZCM7255 [13/70] Decalcification
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Zelmer ZCM7255 [13/70] Decalcification

Zelmer ZCM7255 [13/70] Decalcification
13
PLEN
Wait for the heating time, the indicator light will stop ashing and will remain lit permanently when the
appliance is ready.
Dip the wand (12) into the cup.
Turn the control knob (11) slowly counterclockwise. Hot water will come out from the wand.
When the required quantity is reached, turn the control knob (11) to the “OFF” position.
Press the “on/off” button (4) to switch the appliance off.
Producing steam to heat liquids
Make sure that the control knob (11) is at the “OFF” position.
Press the “on/off” button (4) to switch the appliance on.
Press the steam button (6). The indicator light (1) will be illuminated in red.
Wait for the heating time, the indicator light will stop ashing and will remain lit permanently when the
appliance is ready.
Dip the wand (12) into the liquid to be heated.
Turn the control knob (11) slowly counterclockwise. Steam will come out from the wand.
When the desired temperature is reached, turn the control knob (11) to the “OFF” position.
Press the “on/off” button (4) to switch the appliance off.
Decalcication
Regular descaling of the machine protects the coffee machine and positively affects the taste and aroma
of the beverage. WARNING: Lack of descaling causes a signicant drop in performance and can lead
to damage of the device. Failure to descale the coffee machine will void the warranty. Before descaling
process, make sure that the coffee machine is disconnected from the power source.
If Coffee brewing takes longer time than in the beginning of use or the steam nozzle does not produce
steam, the appliance should be decalcied. If hard water is used, the appliance should be decalcied
after it has been used approximately 40 times. If soft water is used the machine can be decalcied
after it has been used approximately 80 times. Espresso machine liquid decalcier may be used for
decalcifying the appliance. Before descaling process, make sure that the coffee machine is disconnected
from the power source.
1) Pour approximately 250 ml of lukewarm water and then add 250 ml of espresso machine liquid
decalcier (for a correct ratio refer to the manufacturers guide on the preparation of descaling)
2) Place the lter in lock device positon into the device. Then place a cup half-lled with cold water under
the steam nozzle and an empty cup under the lter funnel.
3) Connect the device to the power supply.
4) Press the power button.
5) Then press the auto single cup button.
6) When the decalcier starts to ow down into an empty cup, insert the tip of the steam nozzle into a
cup lled with cold water and press the steam button.
7) Wait for a few seconds and switch off the device. After decalcifying, the device must be rinsed three
times with clean water. In order to do it, repeat steps 1 to 7 lling the water tank with clean water only.
MANITENANCE AND CLEANING
Do not forget to remove the plug from the socket before cleaning the appliance.
Wipe outside with soft dry cloth when coffee machine is wet, never use metal polish.
The removable items should be washed in hot soapy water. Rinse them before xing.
Detach the metal funnel through turn it anticlockwise, get rid of coffee residue inside, then you can clean
it with cleanser, but at last you must rinse with clear water.
Never use a dishwasher to clean any parts from the machine.

Содержание

Похожие устройства

Скачать