Gaggenau CG 492 [16/48] Note on ventilation electrical connection

This household gas cooker has a total rated thermal

load of 17 kW (Hs).

Simultaneous use of all cooking positions of the

cooker generates heat and humidity in the room

where it is installed. This is why atten tion must be

paid to good kitchen ventilation.

This can be guaranteed for example by installing

an extractor hood with a minimum air output of

264 m

/h (= 15 m

/h per kW thermal load).

To ensure ventilation, the room in which this

appliance is installed must have a suitable opening,

like an exterior door or a window that can be

opened.

When using the household gas cooker, the extractor

hood must be operated in such a way, that, the

more cooking positions are used, the higher the air

output level must be.

Electrical connection (AC 220-240 V) is established

by means of a connecting cable with an earthing

contact plug connected to an earthed socket, which

must also be accessible after installation of the gas

hob.

If, after installation of the gas hob, not all poles can

be isolated from the mains by removing the plug,

an isolating device with a contact gap of at least

3 mm must be permanently installed. When estab -

lishing connections, make sure that the connecting

lead cannot come into contact with hot parts of the

gas hob or other hot parts.

Turn all control knobs to the OFF position before

connecting the appliance to the power supply.

The mains connecting cable must at least

correspond to type H 05 V2V2 3G 0.75 or it must be

correspondingly heat-resistant (at least 90 °C).

The mains connecting cable must only be

purchased through and connected by an

authorised specialist.

Pay attention to the information on the rating plate

and connect the PE conductor. Connect the

connecting cable to the mains.

Note on Ventilation Electrical Connection