Gaggenau CG 492 [19/48] Preparing the cabinet

Important notes concerning the cabinet

The gas cooker is suitable for flush mounting into a

worktop. For technical reasons, the top of the pot

grids will be approx. 2 mm above the worktop

surface.

The gas hob can be fitted into the following types of

heat and water-resistant work surfaces:

- Stone work surfaces

- Work surfaces made of plastic or Corian

- Stainless steel work surfaces (welded)

- Solid wood work surfaces, following consultation

with the manufacturer of the work surface (sealing

edges of cut-out)

Installation in other types of work surface

(e.g. chipboard) is not possible.

Worktop depth min. 70 cm.

The unit into which the hob is built must be heat

resistant up to 90 °C.

Do not install the cooktop lower than the work

surface.

All cut-outs in the worktop are to be carried out at a

specialist workshop. The cut must be clean and

precise, since the cut edge is visible on the

surface.

The stability of the furniture being worked on must

also be ensured following the cut-outs.

Clean and degrease the edge of the cut-out, using

a suitable cleaner (follow the instructions given by

the silicone manufacturer).

Preparing the Cabinet

580

604

+1/-0

983

1007

+1/-0

90∞

±0,5

min. 700