Gaggenau CG 492 [22/48] Installing the spindles

• Loosen both cover plates, slide to the center and

remove.

• The gas taps of the burners must be in the off

position (flat side to the top). Slide the spindles

(hollow section) on the square profile on the back

of the control knobs. Firmly slide the coupling

onto the stud on the taps.

• Fix the spindles with the screws provided.

• Replace and screw on both cover plates.

Spindle extensions (SV 405-022 / SV 405-032) are

available should the appliance be installed in a

worktop which is non-standard depth.

• Pull the spindles horizontally from the control

knobs (the spindles are tightly fitted).

• Insert the longer spindles from behind into the

fittings of the control knobs. Be careful that the

broader pin of the control knob fits the broader

fitting of the spindle.

• Continue the installation as described above for

the standard spindles.

Installing the Spindles

cover plates