Canon imageprograf ipf605 [99/578] Loading and printing on rolls

Printing procedure

Loading and Printing on Rolls

These are the basic steps for loading and printing on rolls.

Follow the steps below to switch to a new roll or a roll of a dif ferent type or width before printing.

Note

• If a sheet is loaded in the T op Paper Feed Slot , remove it before this procedure. ( → P .138)

• Before printing banners or other long documents, spread a clean cloth or paper on the oor or use the

Output Stacker to prevent the printed surface from becoming dirty from the oor after printing.

• If you will wait for the ink to dry after printing and simply eject the document, you can deactivate

automatic cutting and print a cut line instead. ( → P .128)

1. T urn the printer on. ( → P .27)

2. Select roll paper as the paper source. ( → P .109)

Basic Printing W orkow 85