D-Link dir-860l/ru/a1a [31/143] Dynamic ip dhcp

D-Link dir-860l/ru/a1a [31/143] Dynamic ip dhcp
27D-Link DIR-860L User Manual
Section 3 - Conguration
Select Dynamic.IP.(DHCP) to obtain IP Address information automatically
from your ISP. Select this option if your ISP does not give you any IP
numbers to use. This option is commonly used for cable modem services.
The Host Name is optional but may be required by some ISPs. Leave
blank if you are not sure.
Check the box if you are having problems obtaining an IP address from
your ISP.
Enter the Primary and Secondary DNS server IP addresses assigned by
your ISP. These addresses are usually obtained automatically from your
ISP. Leave at 0.0.0.0 if you did not specically receive these from your ISP.
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your specic ISP. 1500 is the default MTU.
The default MAC Address is set to the Internet ports physical interface
MAC address on the Broadband Router. It is not recommended that you
change the default MAC address unless required by your ISP. You can
use the Clone.Your.PCs.MAC.Address button to replace the Internet
port’s MAC address with the MAC address of your Ethernet card.
My Internet
Connection:
Host Name:
Use Unicasting:
Primary/Secondary
DNS Server:
MTU:
MAC Address:
Dynamic IP (DHCP)
If you are unsure what method you use to connect to the Internet, try this rst. Cable modems usually use this type of connection

Содержание

Похожие устройства