D-Link dir-860l/ru/a1a [94/143] Ipv6 firewall

90D-Link DIR-860L User Manual

Section 3 - Conguration

IPv6 Firewall

The DIR-860L’s IPv6 Firewall feature allows you to congure which kind of IPv6 trac is allowed to pass through the device. The DIR-860L’s IPv6

Firewall functions in a similar way to the IP Filters feature.

Check the box to enable the IPv6 rewall simple security.

Select an action from the drop-down menu.

Enter a name to identify the IPv6 rewall rule.

Use the drop-down menu to select the time schedule that the IPv6

Firewall Rule will be enabled on. The schedule may be set to Always,

which will allow the particular service to always be enabled. You can

create your own times in the Tools > Schedules section.

Use the Source drop-down menu to specify the interface that connects

to the source IPv6 addresses of the rewall rule.

Enter the source IPv6 address range in the adjacent IP Address Range

eld.

Use the Destination drop-down menu to specify the interface that

connects to the destination IP addresses of the rewall rule.

Select the protocol of the rewall port (All, TCP, UDP, or ICMP).

Enter the rst port of the range that will be used for the rewall rule

in the rst box and enter the last port in the eld in the second box.

Click Save.Settings to save the current conguration.

Enable IPv6 Simple

Security:

Congure IPv6

Firewall:

Name:

Schedule:

Source:

IP Address Range:

Destination:

Protocol:

Port Range: