D-Link dir-860l/ru/a1a [75/143] Advanced

71D-Link DIR-860L User Manual

Section 3 - Conguration

This page will allow you to open a single port. If you would like to open a range of ports, refer to the next page.

Enter a name for the rule or select an application from the drop-down

menu. Select an application and click << to populate the elds.

Enter the IP address of the computer on your local network that you

want to allow the incoming service to. If your computer is receiving an

IP address automatically from the router (DHCP), your computer will

be listed in the “Computer Name” drop-down menu.

Enter the port that you want to open next to Private Port and Public

Port. The private and public ports are usually the same. The public

port is seen from the Internet side, and the private port is used by the

application on the computer within your local network.

Select TCP, UDP, or Both.from the drop-down menu.

The schedule of time when the Virtual Server Rule will be enabled. The

schedule may be set to Always, which will allow the particular service

to always be enabled. You can create your own times in the Tools >

Schedules section.

Select Allow.All (most common) or a created Inbound lter. You may

create your own inbound lters in the Advanced.>.I nbound.Filter

page.

Click Save.Settings to save the current conguration.

Name:

IP Address:

Private Port/

Public Port:

Protocol:

Schedule:

Inbound Filter:

Virtual Server

Advanced