D-Link dir-860l/ru/a1a [77/143] Application rules

73D-Link DIR-860L User Manual

Section 3 - Conguration

Enter a name for the rule. You may select a pre-dened application from

the drop-down menu and click.

This is the port used to trigger the application. It can be either a single

port or a range of ports.

Select the protocol of the trigger port (TCP, UDP, or Both).

This is the port number on the Internet side that will be used to access

the application. You may dene a single port or a range of ports. You

can use a comma to add multiple ports or port ranges.

Select the protocol of the rewall port (TCP, UDP, or Both).

The schedule of time when the Application Rule will be enabled. The

schedule may be set to Always, which will allow the particular service

to always be enabled. You can create your own times in the To ols >

Schedules section.

Click Save.Settings to save the current conguration.

Name:

Trigger:

Trac Type:

Firewall:

Trac Type:

Schedule:

Application Rules

Some applications, such as Internet gaming, video conferencing, Internet telephony and others, require multiple connections. These applications

have diculties working through NAT (Network Address Translation). Special Applications makes some of these applications work with the DIR-860L.

If you need to run applications that require multiple connections, specify the port normally associated with an application in the “Trigger Port”

eld, select the protocol type as TCP or UDP, then enter the rewall (public) ports associated with the trigger port to open them for inbound trac.