Home
Главная
Pioneer
Усилитель Мощности
ND-G500
Инструкция по эксплуатации Страница: 6

Pioneer ND-G500 [6/44] Installation

InstallationInstallation

CAUTION

• Do not install in:

—Places where it could injure the driver or pas-

sengers if the vehicle stops suddenly.

—Places where it may interfere with the driver,

such as on the floor in front of the driver’s

seat.

• Make sure that wires are not caught in the sliding

mechanism of the seats, resulting in a short-

circuit.

• DO NOT allow amplifier to come into contact

with liquids due to, for example, the location

where the amplifier is installed. Electrical shock

could result. Also, amplifier and speaker damage,

smoke, and overheating could result from contact

with liquids. In addition, the amplifier surface and

the surface of any attached speakers could

become hot to the touch and minor burns could

result.

• To ensure proper installation, use the supplied

parts in the manner specified. If any parts other

than the supplied ones are used, they may damage

internal parts of the amplifier, or they may

become loose causing the amplifier to shut down.

• Never replace the fuse with one of greater value

or rating than the original fuse. Use of an

improper fuse could result in overheating and

smoke and could cause damage to the product and

injury including burns.

• The cords must not cover up the area shown in the

figure below. This is necessary to allow the

amplifiers to heat dissipate freely.

CAUTION

To prevent malfunction and/or injury

• To ensure proper heat dissipation of the amplifier,

be sure of the following during installation.

—Allow adequate space above the amplifier for

proper ventilation.

—Do not cover the amplifier with a floor mat or

carpet.

• DO NOT allow amplifier to come into contact

with liquids due to, for example, the location

where the amplifier is installed. Electrical shock

could result. Also, amplifier and speaker damage,

smoke, and overheating could result from contact

with liquids. In addition, the amplifier surface and

the surface of any attached speakers could

become hot to the touch and minor burns could

result.

• Do not install the amplifier on unstable places

such as the spare tire board.

• The best location for installation differs with the

car model and installation location. Secure the

amplifier at a sufficiently rigid location.

• Make temporary connections first and check that

the amplifier and the system operate properly.

• After installing the amplifier, confirm that the

spare tire, jack and tools can be easily removed.

Installing the amplifier

Adhere the hook fastener (provided) to the

bottom of the amplifier and adhere the

loop fastener (provided) to the installation

location.

Amplifier

Hook fastener

Loop fastener

Vehicle mat or chassis

Do not cover these areas.

Notes:

• Direct installation on the carpet is possible if

the hook fastener will adhere to the carpet. Do

not use the loop fastener in this case.

• Thoroughly wipe off the surface before

affixing the hook and loop fastener.

Содержание

Похожие устройства

Installation A CAUTION Do not install in Places where it could injure the driver or pas sengers if the vehicle stops suddenly Places where it may interfere with the driver such as on the floor in front of the driver s seat Make sure that wires are not caught in the sliding mechanism of the seats resulting in a shortcircuit DO NOT allow amplifier to come into contact with liquids due to for example the location where the amplifier is installed Electrical shock could result Also amplifier and speaker damage smoke and overheating could result from contact with liquids In addition the amplifier surface and the surface of any attached speakers could become hot to the touch and minor bums could result To ensure proper installation use the supplied parts in the manner specified If any parts other than the supplied ones are used they may damage internal parts of the amplifier or they may become loose causing the amplifier to shut down Never replace the fuse with one of greater value or rating than the original fuse Use of an improper fuse could result in overheating and smoke and could cause damage to the product and injury including burns The cords must not cover up the area shown in the figure below This is necessary to allow the amplifiers to heat dissipate freely A CAUTION To prevent malfunction and or injury To ensure proper heat dissipation of the amplifier be sure of the following during installation Allow adequate space above the amplifier for proper ventilation Do not cover the amplifier with a floor mat or carpet DO NOT allow amplifier to come into contact with liquids due to for example the location where the amplifier is installed Electrical shock could result Also amplifier and speaker damage smoke and overheating could result from contact with liquids In addition the amplifier surface and the surface of any attached speakers could become hot to the touch and minor burns could result Do not install the amplifier on unstable places such as the spare tire board The best location for installation differs with the car model and installation location Secure the amplifierai a sufficiently rigid location Make temporary connections first and check that the amplifier and the system operate properly After installing the amplifier confirm that the spare tire jack and tools can be easily removed Installing the amplifier Adhere the hook fastener provided to the bottom of the amplifier and adhere the loop fastener provided to the installation location Do not cover these areas Notes Direct installation on the carpet is possible if the hook fastener will adhere to the carpet Do not use the loop fastener in this case Thoroughly wipe off the surface before affixing the hook and loop fastener

Скачать