Makita plm4622 [13/212] Trouble shooting

Makita PLM4621 [13/212] Trouble shooting
13
13. TROUBLE SHOOTING
14. ENVIRONMENT
Should your machine need replacement after extended
use, do not put it in the domestic waste but dispose of it in
an environmentally safe way.
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine: Petrol Lawn Mower
Model No./ Type: PLM4621, PLM4622
Specifications: See “4. Technical Data”
are of series production and
Conforms to the following European Directives:
2006/42/EC, 2004/108/EC,
2000/14/EC & 2005/88/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN836, EN ISO14982
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd.,
Michigan, Drive, Tongwell,
Milton Keynes, MK15 8JD, England
PROBLEM PROBABLE CAUSE CORRECTIVE ACTION
Engine does not start.
Throttle chock not in the correct
position for the prevailing conditions.
Move throttle chock to correct position.
Fuel tank is empty.
Fill tank with fuel: refer to ENGINE OWNERS
MANUAL.
Air cleaner element is dirty.
Clean air cleaner element: refer to ENGINE
OWNERS MANUAL.
Spark plug loose. Tighten spark plug to 25 - 30 Nm.
Spark plug wire loose or disconnected
from plug.
Install spark plug wire on spark plug.
Spark plug gap is incorrect. Set gap between electrodes at 0.7 to 0.8 mm.
Spark plug is defective.
Install new, correctly gapped plug: refer to ENGINE
OWNERS MANUAL.
Carburetor is flooded with fuel.
Remove air cleaner element and pull starter rope
continuously until carburetor clears itself and install
air cleaner element.
Faulty ignition module. Contact Makita authorised service centre.
Engine difficult to start or
loses power.
Dirt, water, or stale fuel tank.
Drain fuel and clean tank. Fill tank with clean, fresh
fuel.
Vent hole in fuel tank cap is plugged. Clean or replace fuel tank cap.
Air cleaner element is duty. Clean air cleaner element.
Engine operates
erratically.
Spark plug is detective.
Install new, correctly gapped plug: refer to ENGINE
OWNERS MANUAL.
Spark plug gap is incorrect. Set gap between electrodes at 0.7 to 0.8 mm.
Air cleaner element is dirty.
Clean air cleaner element: refer to ENGINE
OWNERS MANUAL.
Engine idles poorly.
Air cleaner element is dirty.
Clean air cleaner element: refer to ENGINE
OWNERS MANUAL.
Air slots in engine shroud are blocked. Remove debris from shots.
Cooling fins and air passages under
engine blower housing are blocked.
Remove debris from cooling fins and air passages.
Engine skips at high
speed.
Gap between electrodes of spark plug
is too close.
Set gap between electrodes at 0.7 to 0.8 mm.
Engine overheats.
Cooling air flow is restricted.
Remover any debris from slots in shroud, blower
housing, air passages.
Incorrect spark plug.
Install RJ19LMC spark plug and cooling fins on
engine.
Mower vibrates
abnormally.
Cutting assembly is loose. Tighten blade.
Cutting assembly is unbalanced. Balance blade.

Содержание

13 TROUBLE SHOOTING PROBLEM Engine does not start Engine difficult to start or loses power Engine operates erratically Engine idles poorly Engine skips at high speed PROBABLE CAUSE Move throttle chock to correct position Fuel tank is empty Fill tank with fuel refer to ENGINE OWNERS MANUAL Air cleaner element is dirty Clean air cleaner element refer to ENGINE OWNERS MANUAL Spark plug loose Tighten spark plug to 25 30 Nm Spark plug wire loose or disconnected from plug Install spark plug wire on spark plug Spark plug gap is incorrect Set gap between electrodes at 0 7 to 0 8 mm Spark plug is defective Install new correctly gapped plug refer to ENGINE OWNERS MANUAL Carburetor is flooded with fuel Remove air cleaner element and pull starter rope continuously until carburetor clears itself and install air cleaner element Faulty ignition module Contact Makita authorised service centre Dirt water or stale fuel tank Drain fuel and clean tank Fill tank with clean fresh fuel Vent hole in fuel tank cap is plugged Clean or replace fuel tank cap Air cleaner element is duty Clean air cleaner element Spark plug is detective Install new correctly gapped plug refer to ENGINE OWNERS MANUAL Spark plug gap is incorrect Set gap between electrodes at 0 7 to 0 8 mm Air cleaner element is dirty Clean air cleaner element refer to ENGINE OWNERS MANUAL Air cleaner element is dirty Clean air cleaner element refer to ENGINE OWNERS MANUAL Air slots in engine shroud are blocked Remove debris from shots Cooling fins and air passages under engine blower housing are blocked Remove debris from cooling fins and air passages Gap between electrodes of spark plug is too close Set gap between electrodes at 0 7 to 0 8 mm Cooling air flow is restricted Remover any debris from slots in shroud blower housing air passages Incorrect spark plug Install RJ19LMC spark plug and cooling fins on engine Cutting assembly is loose Tighten blade Cutting assembly is unbalanced Balance blade Engine overheats Mower vibrates abnormally CORRECTIVE ACTION Throttle chock not in the correct position for the prevailing conditions 14 ENVIRONMENT Should your machine need replacement after extended use do not put it in the domestic waste but dispose of it in an environmentally safe way For European countries only EC Declaration of Conformity We Makita Corporation as the responsible manufacturer declare that the following Makita machine s Designation of Machine Petrol Lawn Mower Model No Type PLM4621 PLM4622 Specifications See 4 Technical Data are of series production and Conforms to the following European Directives 2006 42 EC 2004 108 EC 2000 14 EC 2005 88 EC And are manufactured in accordance with the following standards or standardised documents EN836 EN ISO14982 The technical documentation is kept by our authorised representative in Europe who is Makita International Europe Ltd Michigan Drive Tongwell Milton Keynes MK15 8JD England 13

Скачать
Случайные обсуждения