Redmond rmc-m170 [56/84] These programs are recommended for frying meat fish seafood and vegetables

Redmond rmc-m170 [56/84] These programs are recommended for frying meat fish seafood and vegetables
56
Time Delay Function
This function allows programming the device to nish cooking by specic time.
Cooking time may be delayed for up to 24 hours with 5 minute intervals.
The time of a delay should be longer than the cooking time of the program
selected; otherwise the program starts running right after you press CТАРТ/
Подогрев button.
To delay the program (except МУЛЬТИПОВАР”):
1. Repeatedly press “МЕНЮ button to select the program.
Press “ТАЙМЕР/ОТСРОЧКА button, and adjust the cooking time if re-
quired. Repress “ТАЙМЕР/ОТСРОЧКА button. Time Delay function
indicator (“ОТСРОЧКА СТАРТА”) and the time of the delay are displayed
(time left until the end of the program, including the time of delay).
2. Use “+” and buttons to increase or decrease the time. Press and hold
the corresponding button down to scroll through the digits.
For information on setting the cooking time in “МУЛЬТИПОВАР”.
Time Delay function is available in all automatic programs except ЖАРКА
and ПАСТА.
It is not recommended to use Time Delay function if dairy and other perishable
products are being used (eggs, fresh milk, meat, cheese etc.).
Setting the Time Delay in ПАР program remember, that the countdown starts
only when the device reaches its operating temperature (water comes to a full boil).
Keep Warm Function
Function is being automatically activated at the end of the cooking program
(except ЙОГУРТ). When the program nishes, the temperature of the meal
(70–75°C) is being maintained for a period of time up to 24 hours. Тепло/
ОТМЕНА button indicator lights up and the Keep Warm count up is being
displayed.
Press and hold down Тепло/ОТМЕНА button to disable the function.
In order to disable the function in advance press and hold down the “CТАРТ/
Подогрев button until Тепло/ОТМЕНА button indicator goes off. To reactivate
the function press and hold down the CТАРТ/Подогрев button (Тепло/
ОТМЕНА button indicator lights up).
Standard Operating Procedure for Automatic Programs (except
“МУЛЬТИПОВАР” and REHEAT)
1. Measure the ingredients according to the recipe and put them into the
bowl. Make sure that all the ingredients including liquid are below the
scale mark indicating maximum capacity.
2. Place the bowl inside the device. The bowl and the heating element must
t tightly.
3. Close the lid until it clicks into place. Plug in the unit.
4. Repeatedly press “МЕНЮ button to select the program, corresponding
indicator lights up, default time is displayed. When using ЖАРКА,
ТУШЕНИЕ and ПАР programs, press Выбор продукта button to select
the product type. Corresponding indicator lights up МЯСО (MEAT),
РЫБА (FISH) or ОВОЩИ (VEGETABLES) – and the default time is
displayed. Cooking time can be manually adjusted*.
5. Set Time Delay function if required.
6. Press and hold down “CТАРТ/Подогрев button. CТАРТ/Подогрев and
Тепло/ОТМЕНА button indicators light up. Set program starts running
and the countdown begins.
7.
Press and hold down “CТАРТ/Подогрев button during the program operation
to disable the Keep Warm function in advance (Тепло/ОТМЕНА button in-
dicator goes off). Repress CТАРТ/Подогрев button to reactivate the function.
8. When cooking time elapses, the device makes an audible sound. Depend-
ing on your settings the unit either switches to Keep Warm (Keep Warm
count up is displayed) or enters standby mode.
9. To interrupt cooking process, to cancel set program, or the Keep Warm
function press and hold down Тепло/ОТМЕНА button.
*To adjust the cooking time:
1.
Select the cooking program and press “ТАЙМЕР/ОТСРОЧКА button.
Timer indicator lights up, time value is blinking.
2. Use “+” and buttons to increase or decrease the time. Press and hold
the corresponding button down to scroll through the digits.
3.
When the cooking time is adjusted (displayed time keeps blinking) proceed
to the next stage. Press Тепло/ОТМЕНА button to cancel the settings
and reset.
Caution! When manually adjusting the cooking time of the program, consider
the time adjustment range and interval set by default for each program. In
certain programs the time starts to count down only after the device reaches
its operating temperature.
“МУЛЬТИПОВАР” Program
This program can be used to cook any meal with your individual time and
temperature settings.
Temperature adjustment range is from 35°C to 170°C with 5°C intervals. Cook-
ing time adjustment range is from 2 minutes to 15 hours with 1 minute inter-
vals for the period of less than 1 hour, and 10 minute intervals for over an hour.
Keep Warm function is not available in this program if the operating tem-
perature was below 75°C.
1.
Follow steps 1
3 of Standard Operating Procedure for Automatic Programs.
2.
Press “МУЛЬТИПОВАР/°C button. Default temperature is displayed
(100°C). Use “+” and buttons to increase or decrease the temperature.
3. After the temperature of the program has been adjusted ТАЙМЕР (Tim-
er) indicator lights up and the default time (30 minutes) is displayed and
blinking.
If you forgot to adjust the temperature of the program press and hold down the
Тепло/ОТМЕНА button. After you hear an audible sound, readjust the temperature.
Use +” and buttons to increase or decrease the cooking time. Press and hold
the corresponding button down to scroll through the digits.
4. Set the Time Delay function if required. Press “ТАЙМЕР/ОТСРОЧКА
button. ОТСРОЧКА СТАРТА (Time Delay) indicator and the time remain-
ing until the end of the program are displayed. Use “+” and buttons to
adjust the time. Press and hold the corresponding button down to scroll
through the digits.
5.
Follow steps 6
9 of Standard Operating Procedure for Automatic Programs.
“РИС/КРУПЫ” Program
This program is recommended for cooking rice and other grain side dishes.
Default time is 35 minutes. Cooking time can be manually adjusted from 5
minutes to 4 hours in 1 minute intervals.
ТОМЛЕНИЕ Program
This program is recommended for cooking stewed meat, baked milk, and other
slow cooked dishes. Default time is 3 hours. Cooking time can be manually
adjusted from 10 minutes to 15 hours in 10 minute intervals for the period of
less than 1 hour and 30 minute intervals for over an hour.
ПЛОВ Program
This program is recommended for making meat, sh, and vegetable pilafs.
Default time is 1 hour. Cooking time can be manually adjusted from 10 minutes
to 2 hours in 5 minute intervals.
ЖАРКА Programs
These programs are recommended for frying meat, sh, seafood, and vegetables.
Default time depends on the subprogram selected (use Выбор продукта button to
select):МЯСО (MEAT) 15 minutes, РЫБА (FISH) – 12 minutes, ОВОЩИ (VEG-
ETABLES) 18 minutes. Cooking time can be manually adjusted from 5 minutes to 2
hours in 1 minute intervals. Time Delay function is not available in these programs.
ТУШЕНИЕ Programs
These programs are recommended for making meat, sh, and vegetable stews.
Default time depends on the subprogram selected (use Выбор продукта
button to select):МЯСО(MEAT) – 1 hour,РЫБА(FISH) 35 minutes,
ОВОЩИ (VEGETABLES) – 40 minutes. Cooking time can be manually ad-
justed from 10 minutes to 12 hours in 5 minute intervals.
ПАСТА Program
This program is recommended for cooking pasta, sausages, eggs, etc. Default
time is 8 minutes. Cooking time can be manually adjusted from 2 minutes to 1
hour in 1 minute intervals.
Time Delay function is not available in this program.
Pour the water into the bowl. Do not ll over the scale mark indicating maximum
capacity.
Follow steps 2
7 of Standard Operating Procedure for Automatic Programs.
When you hear an audible sound, carefully open the lid and add ingredients
into boiling water. Close the lid until it clicks into place. Press АРТ/Подогрев
button. The program time starts to count down. Follow steps 8
9 of Standard
Operating Procedure for Automatic Programs.
Caution! Some foods can create foam when they cook. Open the lid of the device
a few minutes after ingredients have been added into the boiling water to
prevent foam from boiling over.
МОЛОЧНАЯ КАША Program
This program is recommended for cooking various porridges using low fat milk.
Default time is 35 minutes. Cooking time can be manually adjusted from 5
minutes to 4 hours in 1 minute intervals.
Tips for Cooking Porridges in Multicooker
To avoid milk boiling away, we recommend you do the following:
rinse grain thoroughly before cooking;
grease the sides of the bowl with butter;
follow proportions suggested in the recipe book. Increase or reduce amount
of ingredients proportionally;
using whole milk dilute it by half with water.
Cooking results may vary depending on the place of origin and the manufac-
turer of the products used.
If you did not manage to achieve the desired result, use the multifunctional
program “МУЛЬТИПОВАР”. For the best results set the temperature of 95°C.
Follow the proportions and cooking time recommendations given in the recipe.
СУП Program
This program is recommended for cooking various broths, soups (chunky, bisque,
cream soup, etc.) and making fruit and berry drinks. Default time is 1 hour. Cooking
time can be manually adjusted from 10 minutes to 8 hours in 5 minute intervals.
ЙОГУРТ Program
This program is recommended for making yogurts and proong dough. Default
time is 8 hours. Cooking time can be manually adjusted from 10 minutes to 12
hours in 5 minute intervals.
Keep Warm function is not available in this program.
“ВЫПЕЧКА Program
This program is recommended for baking cakes, pies, and other pastry. Default
time is 45 minutes. Cooking time can be manually adjusted from 10 minutes to
8 hours in 5 minute intervals.
We recommend disabling the “Keep Warm function when baking bread.

Содержание