Moxa MD-119-X1 [34/44] Power off

MD-124 HW Manual On-screen Display and Display Configuration

B-18

selected as the Main Source) will be displayed as the main image. To return the display to its original configuration,

simply select Swap Source once again and the display controller will return to its original display configuration.

If, after configuring a PBP, the menu item Display-Source-Single is activated (and the Swap Source function has

not been activated) then the PBP will disappear, leaving only the Main Source input signal as a solitary display.

When selected, a box icon (█) will indicate that the selected function has been activated.

Power Off

Display-Power Off

This function will perform a (soft) power down (i.e., turns off) the unit, shutting down the display controller and

cutting internal power to all components except the power module. When power is shut off the unit will enter

standby mode, whereupon the red, left-most LED will illuminate, while the green, right-most LED will go dark.

Please note that so long as the power cable is still physically connected to the power module power will

still be present in the unit.

Press the right (►) button to activate. A confirmation dialog will appear. Use ↑/↓ to confirm.