ECS Elitegroup H110S-2P [18/62] H110s 2p user manual

Chapter 2

H110S-2P USER MANUAL

2-4-4. Installing Add-on Cards

The slots on this motherboard are designed to hold expansion cards and connect

them to the system bus. Expansion slots are a means of adding or enhancing the

motherboard’s features and capabilities. With these efficient facilities, you can

increase the motherboard’s capabilities by adding hardware that performs tasks

that are not part of the basic system.

Before installing an add-on card, check the documentation for

the card carefully. If the card is not Plug and Play, you may have

to manually configure the card before installation.

NGFF Slot This is M.2 slot for 2230 WLAN card. It will provide high transfer

performance than original Mini PCIe interface.

This is M.2 slot for 2280 SATA or PCIE SSD installing. It will provide

high transfer performance than original SATA or Mini PCIe

interface.

NGFF1 Slot

Follow these instructions to install an add-on card:

1 Remove a blanking plate from the system case corresponding to the slot

you are going to use.

2 Install the edge connector of the add-on card into the expansion slot.

Ensure that the edge connector is correctly seated in the slot.

3 Secure the metal bracket of the card to the system case with a screw.

For some add-on cards, for example graphics adapters and network

adapters, you have to install drivers and software before you can begin using

the add-on card.