Airwell SWS 1602 HFС 407C [14/82] English

Page 13

Transport, Lifting and Positioning

For lifting operations, use only tools and

material fit for this purpose, in accordance

with accident-prevention regulations.

It is recommended not to remove the protec-

tive plastic envelope, tha should prevent

scraps from penetrating into the appliance

and any damage to the surfaces, until the

unit is ready for operation.

The lifting eyebolts protrude from the base

of the unit; it is therefore recommended to

remove them once the unit has been lifted

and positioned, if in your opinion they are

likely to become a source of hazard and in-

jury.

The eyebolts must be mounted on the unit whenever

it shall be displaced and then lifted again.

3.3 Anchoring

It is not essential to secure the unit to the foundations,

unless in areas where there is a serious risk of earth-

quake, or if the appliance is installed on the top of a

steel frame.

3.4 Storage

When the unit is to be stored before installation,

adopt a few precautions to prevent any damage or

risk of corrosion or wear:

plug or seal every single opening, such as water

fittings

do not store the appliance in a room where the

temperature exceeds 50°C for the units using

R407C and, if possible, do not expose to direct

sunlight

it is recommended to store the unit in a roof where

traffic is minimized, to prevent the risk of acciden-

tal damage

the unit must not be washed with a steam jet

take away and leave to the site manager all the

keys providing access to the control board

Finally, it is recommended to carry out visual inspec-

tions at regular intervals.

English

Manuale SWS-SWR EN1.qxp 05/11/06 14:18 Pagina 13