Tp-Link TD-W8950ND Инструкция по эксплуатации онлайн [31/94] 38839

TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide

Figure 4-11

 PPP Username: Enter your username for your PPPoA connection to identify and verify your

account to the ISP.

 PPP Password: Enter your password for your PPPoA connection.

 Authentication Method: Choose a method of authentication, AUTO, PAP, CHAP, or

MSCHAP.

 MTU: The default MTU value is 1480 Bytes. It is not recommended that you change the

default value unless required by your ISP. The value should be between 512 and 1492.

 Enable Fullcone NAT: Check this box to enable the Fullcone NAT function. The default value

is disabled.

 Dial on demand: If you check this box, the Internet connection can be terminated

automatically after a specified inactivity period (Inactivity Timeout) and be re-established

when you attempt to access the Internet again. The default value of Inactivity Timeout is 15.

The value should be between 1 and 4320.

 PPP IP extension: If this box is checked, the IP address obtained by the Router will be

assigned to the computer, and the NAT and Firewall will be disabled.

 Use Static IP Address: Check this box to use the static IP address to dial. The default value is

disabled.

 Enable PPP Debug Mode: Check this box to enable the debug mode. The default value is

disabled.

Click Next button in

Figure 4-11, and then you will see Figure 4-12. Check or uncheck the Enable

WAN Service box according to your needs.