D-Link DIS-200G-12PS [100/172] Command default level

DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide

This example shows how the maximum bandwidth limits are configured on ethernet 1/0/3. The ingress

bandwidth is limited to 1300Kbps..

Switch# configure terminal

Switch(config)# interface Ethernet 1/0/3

Switch(config-if)# rate-limit input 1300

Switch(config-if)#

23-4

show mls qos interface

This command is used to display port level QoS configurations.

show mls qos interface

INTERFACE-ID

[, | -] {cos | scheduler| rate-limit }

Parameters

interface INTERFACE-ID

Specifies the interface ID to display.

(Optional) Specifies a series of interfaces, or separate a range of

interfaces from a previous range. No space is allowed before and

after the comma.

(Optional) Specifies a range of interfaces. No space is allowed

before and after the hyphen.

cos

Specifies to displays the port default CoS.

scheduler

Specifies to displays the transmit queue scheduling settings.

rate-limit

Specifies to displays the bandwidth limitation configured for the

port.

Default

None.

Command Mode

EXEC Mode or Any Configuration Mode.

Command Default Level

Level: 1.

Usage Guideline

This command is used to display port level QoS configurations.

Example

This example shows how to display the default CoS for eth 1/0/1 to eth 1/0/5.

Switch# show mls qos interface Ethernet 1/0/1-5 cos

Interface CoS

------------ ----

eth1/0/1 0

eth1/0/2 3