![Gigabyte GA-770T-D3L (rev. 1.x) [46/100] Ecp mode use dma](/img/pdf.png)
Gigabyte GA-770T-D3L (rev. 1.x) [46/100] Ecp mode use dma
![Gigabyte GA-770T-D3L (rev. 1.x) [46/100] Ecp mode use dma](/views2/1047191/page46/bg2e.png)
BIOS Setup - 46 -
USB EHCI Controller (Onboard USB 2.0 Controllers)
Enables or disables the integrated USB 2.0 controller. (Default: Enabled)
USB Keyboard Support
Allows USB keyboard to be used in MS-DOS. (Default: Enabled)
USB Mouse Support
Allows USB mouse to be used in MS-DOS. (Default: Disabled)
Legacy USB storage detect
Determines whether to detect USB storage devices, including USB ash drives and USB hard drives
during the POST. (Default: Enabled)
Onboard Serial Port 1
Enables or disables the rst serial port and species its base I/O address and corresponding interrupt.
Options are: Auto, 2F8/IRQ3, 3F8/IRQ4(default), 3E8/IRQ4, 2E8/IRQ3, Disabled.
Onboard Parallel Port
Enables or disables the onboard parallel port (LPT) and species its base I/O address and correspond-
ing interrupt. Options are: 378/IRQ7 (default), 278/IRQ5, 3BC/IRQ7, Disabled.
Parallel Port Mode
Selects an operating mode for the onboard parallel (LPT) port. Options are: SPP (Standard Parallel Port)
(default), EPP (Enhanced Parallel Port), ECP (Extended Capabilities Port), ECP+EPP.
ECP Mode Use DMA
Selects DMA channel for the LPT port in ECP mode. This item is congurable only if Parallel Port Mode
is set to ECP or ECP+EPP mode. Options are: 3 (default), 1.
Содержание
- Ga 770t d3l 1
- User s manual 1
- 2010 giga byte technology co ltd all rights reserved the trademarks mentioned in this manual are legally registered to their respective owners 3
- Copyright 3
- Disclaimer 3
- Documentation classifications 3
- Example 3
- For product related information check on our website at http www gigabyte com tw 3
- Identifying your motherboard revision 3
- In order to assist in the use of this product gigabyte provides the following types of documentations 3
- Information in this manual is protected by copyright laws and is the property of gigabyte changes to the specifications and features in this manual may be made by gigabyte with out prior notice no part of this manual may be reproduced copied translated transmitted or published in any form or by any means without gigabyte s prior written permission 3
- The revision number on your motherboard looks like this rev x x for example rev 1 means the revision of the motherboard is 1 check your motherboard revision before updating motherboard bios drivers or when looking for technical information 3
- Box contents optional items ga 770t d3l motherboard layout ga 770t d3l motherboard block diagram 4
- Chapter 1 hardware installation 4
- Chapter 2 bios setup 1 4
- Table of contents 4
- Chapter 3 drivers installation 5 5
- Chapter 4 unique features 9 5
- Chapter 5 appendix 1 5
- Box contents 6
- Optional items 6
- Ga 770t d3l 7
- Ga 770t d3l motherboard layout 7
- Note use this port to connect a ps 2 keyboard or ps 2 mouse 7
- Ga 770t d3l motherboard block diagram 8
- 1 installation precautions 9
- Chapter 1 hardware installation 9
- 2 product specifications 10
- 3 1 installing the cpu 13
- 3 installing the cpu and cpu cooler 13
- 3 2 installing the cpu cooler 15
- 4 1 dual channel memory configuration 16
- 4 installing the memory 16
- 4 2 installing a memory 17
- 5 installing an expansion card 18
- 6 back panel connectors 19
- Coaxial s pdif out connector 19
- Parallel port 19
- Ps 2 keyboard or ps 2 mouse port 19
- Rj 45 lan port 19
- Serial port 19
- Usb 2 1 port 19
- Line in jack blue 20
- Line out jack green 20
- Mic in jack pink 20
- 7 internal connectors 21
- 2 atx_12v atx 2x2 12v power connector and 2x12 main power connector 22
- Hardware installation 22 22
- High power consumption be used 500w or greater if a power supply is used that does not provide the required power the result can lead to an unstable or unbootable system 22
- To meet expansion requirements it is recommended that a power supply that can withstand 22
- With the use of the power connector the power supply can supply enough stable power to all the components on the motherboard before connecting the power connector first make sure the power supply is turned off and all devices are properly installed the power connector possesses a foolproof design connect the power supply cable to the power connector in the correct orientation the 12v power connector mainly supplies power to the cpu if the 12v power connector is not connected the computer will not start 22
- 23 hardware installation 23
- 4 5 cpu_fan sys_fan1 sys_fan2 pwr_fan fan headers 23
- Be sure to connect fan cables to the fan headers to prevent your cpu and system from over 23
- Fdd floppy disk drive connector 23
- Headers 23
- Heating overheating may result in damage to the cpu or the system may hang 23
- The motherboard has a 4 pin cpu fan header cpu_fan a 4 pin sys_fan1 and one 3 pin sys_ fan2 system fan headers and a 3 pin power fan header pwr_fan most fan headers possess a foolproof insertion design when connecting a fan cable be sure to connect it in the correct orientation the black connector wire is the ground wire the motherboard supports cpu fan speed control which requires the use of a cpu fan with fan speed control design for optimum heat dissipation it is recom mended that a system fan be installed inside the chassis 23
- These fan headers are not configuration jumper blocks do not place a jumper cap on the 23
- This connector is used to connect a floppy disk drive the types of floppy disk drives supported are 360 kb 720 kb 1 mb 1 4 mb and 2 8 mb before connecting a floppy disk drive be sure to locate pin 1 of the connector and the floppy disk drive cable the pin 1 of the cable is typically designated by a stripe of different color for purchasing the optional floppy disk drive cable please contact the local dealer 23
- A raid 0 or raid 1 configuration requires at least two hard drives if more than two hard 24
- A raid 10 configuration requires at least four hard drives and the total number of hard drives 24
- Drives are to be used the total number of hard drives must be an even number 24
- Hardware installation 24 24
- Ide ide connector 24
- Must be an even number 24
- Pin no definition 24
- Please connect the l shaped end of the sata cable to your sata hard drive 24
- Sata2_0 1 2 3 4 5 sata 3gb s connectors 24
- The ide connector supports up to two ide devices such as hard drives and optical drives before attach ing the ide cable locate the foolproof groove on the connector if you wish to connect two ide devices remember to set the jumpers and the cabling according to the role of the ide devices for example master or slave for information about configuring master slave settings for the ide devices read the instructions from the device manufacturers 24
- The sata connectors conform to sata 3gb s standard and are compatible with sata 1 gb s standard each sata connector supports a single sata device the amd sb710 controller supports raid 0 raid 1 raid 10 and jbod refer to chapter 5 configuring sata hard drive s for instructions on configur ing a raid array 24
- F_panel front panel header 25
- Audio signals will be present on both of the front and back panel audio connections simultane 26
- Cd_in cd in connector 26
- F_audio front panel audio header 26
- Front panel audio module refer to the instructions on how to activate ac 97 functionality via the audio software in chapter 5 configuring 2 4 5 7 channel audio 26
- Hardware installation 26 26
- Instead of a single plug for information about connecting the front panel audio module that has different wire assignments please contact the chassis manufacturer 26
- Ously if you want to mute the back panel audio only supported when using an hd front panel audio module refer to chapter 5 configuring 2 4 5 7 channel audio 26
- Some chassis provide a front panel audio module that has separated connectors on each wire 26
- The front panel audio header supports hd audio by default if your chassis provides an ac 97 26
- The front panel audio header supports intel high definition audio hd and ac 97 audio you may connect your chassis front panel audio module to this header make sure the wire assignments of the module con nector match the pin assignments of the motherboard header incorrect connection between the module connector and the motherboard header will make the device unable to work or even damage it 26
- You may connect the audio cable that came with your optical drive to the header 26
- Spdif_in s pdif in header 27
- Spdif_out s pdif out header 27
- Always turn off your computer and unplug the power cord before replacing the battery replace the battery with an equivalent one danger of explosion if the battery is replaced with 28
- An incorrect model 28
- Contact the place of purchase or local dealer if you are not able to replace the battery by your 28
- Cord from the power outlet to prevent damage to the usb bracket 28
- Do not plug the ieee 1394 bracket 2x5 pin cable into the usb header prior to installing the usb bracket be sure to turn off your computer and unplug the power 28
- F_usb1 f_usb2 usb headers 28
- Hardware installation 28 28
- Of the battery the positive side should face up 28
- Self or uncertain about the battery model 28
- The battery provides power to keep the values such as bios configurations date and time information in the cmos when the computer is turned off replace the battery when the battery voltage drops to a low level or the cmos values may not be accurate or may be lost 28
- The headers conform to usb 2 1 specification each usb header can provide two usb ports via an optional usb bracket for purchasing the optional usb bracket please contact the local dealer 28
- Used batteries must be handled in accordance with local environmental regulations 28
- When installing the battery note the orientation of the positive side and the negative side 28
- Clr_cmos clearing cmos jumper 29
- Chapter 2 bios setup 31
- 1 startup screen 32
- A the logo screen default 32
- B the post screen 32
- 2 the main menu 33
- Bios setup program function keys 33
- Sample bios version e1c 33
- Advanced bios features 34
- Exit without saving 34
- Integrated peripherals 34
- Keys for the main menu only 34
- Load fail safe defaults 34
- Load optimized defaults 34
- Mb intelligent tweaker m i t 34
- Pc health status 34
- Power management setup 34
- Save exit setup 34
- Set supervisor password 34
- Set user password 34
- Standard cmos features 34
- 3 mb intelligent tweaker m i t 35
- 35 bios setup 35
- Advanced clock calibration 35
- Dent on your overall system configurations incorrectly doing overclock overvoltage may result in damage to cpu chipset or memory and reduce the useful life of these components this page is for advanced users only and we recommend you not to alter the default settings to prevent system instability or other unexpected results inadequately altering the settings may result in system s failure to boot if this occurs clear the cmos values and reset the board to default values 35
- Note this item appears only if you install a cpu that supports this feature 35
- System voltage control item to auto to optimize the system voltage settings 35
- When the system voltage optimized item blinks in red it is recommended that you set the 35
- Whether the system will work stably with the overclock overvoltage settings you made is depen 35
- Advanced clock calibration 36
- Cpu clock ratio 36
- Cpu frequency mhz 36
- Cpu host clock control 36
- Cpu northbridge freq 36
- Ec firmware selection 36
- Ht link frequency 36
- Pcie clock mhz 36
- Set memory clock 36
- Value all cores 36
- Value core 0 value core 1 value core 2 value core 3 36
- 37 bios setup 37
- Cpu host clock control cpu frequency mhz set memory clock memory clock 37
- Dram configuration 37
- Mb intelligent tweaker m i t main menu mb intelligent tweaker m i t main menu 37
- Memory clock 37
- Note this item appears only if you install a cpu that supports this feature 37
- The settings under the four items above are synchronous to those under the same items on the 37
- This option is configurable only when set memory clock is set to manual 37
- X4 0 x4 0 sets memory clock to x4 0 37
- X5 3 x5 3 sets memory clock to x5 3 37
- X6 6 x6 6 sets memory clock to x6 6 37
- X8 0 x8 0 sets memory clock to x8 0 37
- Bank interleaving 38
- Cas latency 38
- Dcts mode 38
- Ddr3 timing items 38
- Minimum ras active time 38
- Precharge time 38
- Ras to cas r w delay 38
- Ras to ras delay 38
- Row cycle time 38
- Row precharge time 38
- T 2t command timing 38
- Trfc0 for dimm1 38
- Trfc1 for dimm3 38
- Trfc2 for dimm2 38
- Trfc3 for dimm4 38
- Twtr command delay 38
- Write recovery time 38
- Channel interleave 39
- Cpu nb vid control 39
- Cpu voltage control 39
- Dram voltage control 39
- Nb voltage control 39
- Normal cpu vcore 39
- Sb ht voltage control 39
- System voltage control 39
- 4 standard cmos features 40
- Access mode access mode sets the hard drive access mode options are auto default chs lba large 40
- Access mode access mode sets the hard drive access mode options are auto default large 40
- Auto lets the bios automatically detect ide sata devices during the post default 40
- Bios setup 40 40
- Configure your ide sata devices by using one of the two methods below configure your ide sata devices by using one of the two methods below 40
- Date mm dd yy 40
- Extended ide drive extended ide drive 40
- Ide auto detection 40
- Ide channel 0 1 master slave 40
- Ide channel 0 1 master slave ide channel 0 1 master slave 40
- Ide channel 2 3 master slave 40
- Ide hdd auto detection 40
- None if no ide sata devices are used set this item to none so the system will skip 40
- Sets the system date the date format is week read only month date and year select the desired field and use the up arrow or down arrow key to set the date 40
- Sets the system time for example 1 p m is 13 0 0 select the desired field and use the up arrow or down arrow key to set the time 40
- The detection of the device during the post for faster system startup the detection of the device during the post for faster system startup 40
- Time hh mm ss 40
- To autodetect the parameters of the ide sata device on this channel 40
- Drive a 41
- Floppy 3 mode support 41
- Halt on 41
- Memory 41
- 5 advanced bios features 42
- Amd c1e suppor 42
- Amd k8 cool quiet control 42
- Auto lets the amd cool n quiet driver dynamically adjust the cpu clock and vid to 42
- Bios setup 42 42
- Default disabled default disabled 42
- Disabled disabled disables this function 42
- Enables or disables the c1e cpu power saving function in system halt state when enabled the cpu core frequency and voltage will be reduced during system halt state to decrease power consumption default disabled 42
- Enables or disables the patch amd tlb erratum function default enabled 42
- First second third boot device 42
- Hard disk boot priority 42
- Note this item appears only if you install a cpu that supports this feature 42
- Patch amd tlb erratu 42
- Reduce heat output from your computer and its power consumption default reduce heat output from your computer and its power consumption default 42
- To accept options are floppy ls120 hard disk cdrom zip usb fdd usb zip usb cdrom usb hdd legacy lan disabled 42
- To exit this menu when finished 42
- Virtualization 42
- Virtualization allows a platform to run multiple operating systems and applications in independent parti tions with virtualization one computer system can function as multiple virtual systems 42
- Away mode 43
- Backup bios image to hdd 43
- Full screen logo show 43
- Hdd s m a r t capability 43
- Init display first 43
- Password check 43
- 6 integrated peripherals 44
- Ahci ahci configures the sata controllers to ahci mode advanced host controller interface 44
- Ahci is an interface specification that allows the storage driver to enable advanced ahci is an interface specification that allows the storage driver to enable advanced 44
- Allows you to decide whether to activate the boot rom integrated with the onboard lan chip 44
- As sata type the mode depends on the as sata type the mode depends on the onchip sata type settings 44
- Ating mode of the integrated sata2_4 sata2_5 connectors ating mode of the integrated sata2_4 sata2_5 connectors 44
- Bios setup 44 44
- Configures the operating mode of the integrated sata2_0 sata2_3 controller 44
- Default disabled default disabled 44
- Enable native ide mode if you wish to install operating systems that support native enable native ide mode if you wish to install operating systems that support native 44
- Enables or disables the integrated ide controller default enabled 44
- Enables or disables the onboard lan function default enabled 44
- Enables or disables the sata controller integrated in the amd sb710 chip default enabled 44
- Ide ide disables raid for the sata controller and configures the sata controller to pata 44
- If you wish to install a 3rd party add in network card instead of using the onboard lan set this item to if you wish to install a 3rd party add in network card instead of using the onboard lan set this item to disabled 44
- Mode default mode default 44
- Mode mode 44
- Native ide native ide allows the sata controller to operate in native ide mode default 44
- Onboard lan boot rom 44
- Onboard lan function 44
- Onchip ide channel 44
- Onchip sata controller amd sb710 chipset 44
- Onchip sata port4 5 type amd sb710 sata2_4 sata2_5 connectors 44
- Onchip sata type amd sb710 sata2_0 sata2_3 connectors 44
- Raid raid enables raid for the sata controller 44
- Serial ata features such as native command queuing and hot plug serial ata features such as native command queuing and hot plug 44
- This option is configurable only when onchip sata type is set to raid or ahci configures the oper 44
- Onboard audio function 45
- Onchip usb controllers onboard usb 1 controllers 45
- Smart lan lan cable diagnostic function 45
- Ecp mode use dma 46
- Legacy usb storage detect 46
- Onboard parallel port 46
- Onboard serial port 1 46
- Parallel port mode 46
- Usb ehci controller onboard usb 2 controllers 46
- Usb keyboard support 46
- Usb mouse support 46
- 47 bios setup 47
- 7 power management setup 47
- Acpi suspend type 47
- Allows the system to be awakened from acpi s3 sleep state by a wake up signal from the installed usb device default enabled 47
- Allows the system to be awakened from an acpi sleep state by a wake up signal from a modem that supports wake up function default disabled 47
- Allows the system to be awakened from an acpi sleep state by a wake up signal from a pci or pcie de vice note to use this function you need an atx power supply providing at least 1a on the 5vsb lead default enabled 47
- Button is pressed for less than 4 seconds the system will enter suspend mode button is pressed for less than 4 seconds the system will enter suspend mode 47
- Configures the way to turn off the computer in ms dos mode using the power button 47
- Delay 4 sec delay 4 sec press and hold the power button for 4 seconds to turn off the system if the power 47
- In s1 sleep state the system appears suspended and stays in a low power mode in s1 sleep state the system appears suspended and stays in a low power mode 47
- In s3 sleep state the system appears to be off and consumes less power than in in s3 sleep state the system appears to be off and consumes less power than in 47
- Instant off instant off press the power button and then the system will be turned off instantly default 47
- Its working state exactly where it was left off its working state exactly where it was left off 47
- Modem ring resume 47
- Note supported on windows 7 vista operating system only 47
- Pme event wake up 47
- S1 pos s1 pos enables the system to enter the acpi s1 power on suspend sleep state 47
- S3 str s3 str enables the system to enter the acpi s3 suspend to ram sleep state default 47
- Soft off by power button 47
- Specifies the acpi sleep state when the system enters suspend 47
- The s1 state when signaled by a wake up device or event the system resumes to the s1 state when signaled by a wake up device or event the system resumes to 47
- The system can be resumed at any time the system can be resumed at any time 47
- Usb wake up from s3 47
- Ac back function 48
- Erp support 48
- Hpet suppor 48
- Kb power on password 48
- Power on by alarm 48
- Power on by keyboard 48
- Power on by mouse 48
- 49 bios setup 49
- 8 pc health status 49
- Case opened 49
- Displays the detection status of the chassis intrusion detection device attached to the motherboard ci header if the system chassis cover is removed this field will show yes otherwise it will show no to clear the chassis intrusion status record set reset case open status to enabled save the settings to the cmos and then restart your system 49
- Enables or disables the cpu overheating protection function when enabled the cpu core voltage and ratio will be reduced when the cpu is overheated default enabled 49
- Hardware thermal control 49
- Keeps or clears the record of previous chassis intrusion status enabled clears the record of previous chassis intrusion status and the case opened field will show no at next boot default disabled 49
- Reset case open status 49
- Cpu smart fan control 50
- Cpu smart fan mode 50
- Cpu system power fan fail warning 50
- Cpu warning temperature 50
- Current cpu system power fan speed rpm 50
- Current system cpu temperature 50
- Current voltage v vcore ddr2 1 v 3 v 12v 50
- System smart fan control 50
- 10 load optimized defaults 51
- 51 bios setup 51
- 9 load fail safe defaults 51
- Key to load the optimal bios default settings the bios defaults settings help the system to operate in optimum state always load the optimized defaults after updating the bios or after clearing the cmos values 51
- Key to load the safest bios default settings in case system instability occurs you may try to load fail safe defaults which are the safest and most stable bios settings for the motherboard 51
- 11 set supervisor user password 52
- Again the message password disabled will appear indicating the password has been can celled 52
- Bios setup 52 52
- Supervisor password 52
- The bios setup program allows you to specify two separate passwords 52
- User password 52
- When a system password is set and the when a system password is set and the password check item in advanced bios features is set to setup you must enter the supervisor password for entering bios setup and making bios changes 52
- When the when the password check item is set to system you must enter the supervisor password or user password at system startup and when entering bios setup 52
- When the when the password check item is set to system you must enter the supervisor password or user password at system startup to continue system boot in bios setup you must enter the supervisor password if you wish to make changes to bios settings the user password only allows you to view the bios settings but not to make changes 52
- 12 save exit setup 53
- 13 exit without saving 53
- 53 bios setup 53
- To return to the bios setup main menu 53
- 1 installing chipset drivers 55
- Chapter 3 drivers installation 55
- 2 application software 56
- 3 technical manuals 56
- 4 contact 57
- 5 system 57
- 6 download center 58
- 1 xpress recovery2 59
- Before you begin 59
- Chapter 4 unique features 59
- Installation and configuration 59
- System requirements 59
- 2 1 updating the bios with the q flash utility 62
- 2 bios update utilities 62
- A before you begin 62
- 63 unique features 63
- B updating the bios 63
- Do not turn off or restart the system when the system is reading updating the bios do not remove the floppy disk usb flash drive or hard drive when the system is updat 63
- Ing the bios 63
- Key during the post to access q flash 63
- Make sure the bios update file matches your motherboard model 63
- Step 3 when the update process is complete press any key to return to the main menu 63
- The save main bios to drive option allows you to save the current bios file q flash only supports usb flash drive or hard drives using fat32 16 12 file system if the bios update file is saved to a hard drive in raid ahci mode or a hard drive attached to 63
- To begin the bios update the monitor will display the update process 63
- When updating the bios choose the location where the bios file is saved the following procedure as sumes that you save the bios file to a floppy disk 63
- To exit q flash and reboot the system as the system boots you should see the new bios version is present on the post screen 64
- To load bios defaults 64
- To load bios defaults system will re detect all peripheral devices after a bios update so we recommend that you reload bios defaults 64
- To save settings to cmos and exit bios setup the proce dure is complete after the system restarts 64
- Unique features 64 64
- 2 2 updating the bios with the bios utility 65
- A before you begin 65
- B using bios 65
- C after updating the bios 65
- 3 easytune 6 66
- Gigabyte s easytune 6 is a simple and easy to use interface that allows users to fine tune their system settings or do overclock overvoltage in windows environment the user friendly easytune 6 interface also includes tabbed pages for cpu and memory information letting users read their system related information without the need to install additional software 66
- Tab function 66
- Tabs information 66
- The easytune 6 interface 66
- The the cpu tab provides information on the installed cpu and motherboard 66
- Unique features 66 66
- 4 easy energy saver 67
- Meter mode button information table 67
- The easy energy saver interface a meter mode 67
- B total mode 68
- C stealth mode 68
- Total mode button information table 68
- 5 q share 69
- Directions for using q share 69
- Options descriptions 69
- 6 time repair 70
- Preference screen 70
- System restore 70
- 1 1 configuring the onboard sata controller 71
- 1 configuring sata hard drive s 71
- A installing sata hard drive s in your computer 71
- Before you begin 71
- Chapter 5 appendix 71
- To configure sata hard drive s follow the steps below 71
- Appendix 72 72
- B configuring sata controller mode in bios setup 72
- Figure 1 72
- Make sure to configure the sata controller mode correctly in system bios setup 72
- Step 2 save changes and exit bios setup 72
- The bios setup menus described in this section may differ from the exact settings for your moth erboard the actual bios setup menu options you will see shall depend on the motherboard you have and the bios version 72
- To enter bios setup during the post power on self test ensure onchip sata controller is enabled under integrated peripherals to enable raid for the sata2_0 1 2 3 connectors set onchip sata type to raid to enable raid for the sata2_4 esata con nectors set onchip sata type to raid and set onchip sata port4 5 type to as sata type figure 1 72
- C configuring raid set in raid bios 73
- Appendix 74 74
- Figure 4 74
- Figure 5 74
- To enter the define ld menu window figure 4 the define ld selection from the main menu allows users to begin the process of manually defining the drive elements and raid levels for one or multiple disk arrays 74
- To enter the raid configuration menu figure 5 74
- 75 appendix 75
- After the creation is complete the screen will return to define ld menu where you will see the newly 75
- Again if you want to exit the raid bios utility 75
- Created array 75
- Disk array the total drv section will show the number of disks assigned 75
- Figure 6 75
- Figure 7 75
- Figure 8 75
- Keys to save the information the window below will appear 75
- Mum capacity 75
- To change the assignment option to y this action adds the drive to the 75
- To clear the mbr or press other keys to ignore this option then the window below 75
- To set the capacity of the raid array or press other keys to set the array to its maxi 75
- View drive assignments the view drive assignments option in the main menu displays whether the attached hard drives are as signed to a disk array or are unassigned under the assignment column drives are labeled with their as signed disk array or shown as free if unassigned 75
- Will appear 75
- Appendix 76 76
- Delete an array the delete array menu option allows for deletion of disk array assignments 76
- Deleting an existing disk array could result in loss of data record all array information including the array type the disk members and stripe block size in case you wish to undo a deletion 76
- Figure 9 76
- If you are sure to delete the array or other keys to abort 76
- In the main menu to enter the delete ld menu then highlight the array you 76
- The view ld definition menu will appear as shown in figure 9 showing which drives are assigned to 76
- To return to main menu 76
- 1 2 making a sata raid ahci driver diskette 77
- 77 appendix 77
- Copy d bootdrv sb7xx x86 77
- Figure 1 77
- For the sata driver directories for different windows operating systems for the sata driver directories for different windows operating systems 77
- In ms dos mode prepare a startup disk that has cd rom support and a blank formatted floppy disk steps 1 boot from the startup disk 2 remove the startup disk and insert the prepared floppy disk and the motherboard driver disk here we as 77
- Note type the driver directory based on the operating system to be installed refer to the following table 77
- Required for ahci and raid mode 77
- Sume that the drive letter for your optical drive is d 77
- To successfully install operating system onto sata hard drive s that is are configured to raid ahci mode you need to install the sata controller driver during the os installation without the driver the hard drive may not be recognized during the windows setup process first of all copy the driver for the sata controller from the motherboard driver disk to a floppy disk for installing windows vista you also can copy the sata con troller driver from the motherboard driver disk to a usb flash drive see the instructions below about how to copy the driver in ms dos and windows mode 77
- 1 3 installing the sata raid ahci driver and operating system 79
- A installing windows xp 79
- B installing windows vista 80
- 2 1 configuring 2 4 5 7 channel audio 83
- 2 configuring audio input and output 83
- A configuring speakers 83
- B configuring sound effect 84
- C activating an ac 97 front panel audio module 85
- D muting the back panel audio for hd audio only 85
- 2 2 configuring s pdif in out 86
- A s pdif in 86
- B s pdif out 87
- 2 3 configuring microphone recording 88
- Enabling stereo mix 89
- 2 4 using the sound recorder 90
- A recording sound 90
- B playing the recorded sound 90
- 3 1 frequently asked questions 91
- 3 troubleshooting 91
- 91 appendix 91
- To read more faqs for your motherboard please go to the support downloads motherboard faq page on gigabyte s website 91
- 3 2 troubleshooting procedure 92
- Appendix 92 92
- If you encounter any troubles during system startup follow the troubleshooting procedure below to solve the problem 92
- 93 appendix 93
- If the procedure above is unable to solve your problem contact the place of purchase or local dealer for help or go to the support downloads technical service zone page to submit your question our customer service staff will reply you as soon as possible 93
- 4 regulatory statements 94
- Our commitment to preserving the environment 94
- Regulatory notices 94
- Restriction of hazardous substances rohs directive statement 94
- Waste electrical electronic equipment weee directive statement 94
- Weee symbol statement 94
- China restriction of hazardous substances table 95
- 99 appendix 99
- Contact us 99
- Appendix 100 100
- Gigabyte global service system 100
- To submit a technical or non technical sales market ing question please link to http ggts gigabyte com tw then select your language to enter the system 100
Похожие устройства
- Thermex H 15-O Инструкция по эксплуатации
- Samsung RL26DC** Инструкция по эксплуатации
- Gigaset SL400 Metal Black Инструкция по эксплуатации
- Gigabyte GA-770T-D3L (rev. 3.1) Инструкция по эксплуатации
- Acer Aspire 5332 Инструкция по эксплуатации
- Thermex ES 30 V Silverhit Инструкция по эксплуатации
- Gigabyte GA-8I945GMMFY-RH Инструкция по эксплуатации
- JVC XV-N5SL Инструкция по эксплуатации
- Acer Aspire 5333 Инструкция по эксплуатации
- Thermex RZL 30 Инструкция по эксплуатации
- Gigabyte GA-8IDXH Инструкция по эксплуатации
- Rover RoverMedia Aria G5 Инструкция по эксплуатации
- Acer Aspire 5334 Инструкция по эксплуатации
- Gigabyte GA-8IE2004-L Инструкция по эксплуатации
- Yamaha YPT-220 Инструкция по эксплуатации
- Ballu BSN-07HN1 Инструкция по эксплуатации
- Gigabyte GA-8IE800 Инструкция по эксплуатации
- Bosch WAA18160BY Инструкция по эксплуатации
- Thermos CanTote B Инструкция по эксплуатации
- Ballu BSN-09HN1 Инструкция по эксплуатации