Home
Главная
Al-Ko
Бензопила
621
Руководство пользователя Страница: 25

Al-Ko 621 Руководство пользователя онлайн [25/80] 413736

GB-8

• Do not store the saw outdoors or in damp and moist

areas.

• Check all the chain saw parts, in particular the chain,

bar and sprocket, of wear after every use.

• Ensure that the chain tension is correct. If the chain

is too loose, it may come off during use and lead to

injuries. The chain must be replaced immediately if it

is damaged. The cutting teeth must be at least 4 mm

long.

• Check the motor housing and power cable after every

use for damage. If there is any sign of damage, have

the chain saw checked by a specialised workshop.

• Check the oil level and lubrication of your chain

saw after every use. Insufﬁ cient lubrication leads to

damage to the chain, bar and motor.

• Check how keen the chain is every time before you

use the chain saw. A blunt chain will cause overheating

of the motor.

• Sharpening a saw chain requires experience and spe-

cialised knowledge. We therefore recommend to have

sharpening carried out by a specialised workshop.

7. In the case of technical problems

• The machine does not start up: Check whether the

current socket is live. Check whether the power cable

is undamaged. If neither case applies, take the chain

saw to a specialised workshop.

• Chain does not run: Check position of handguard

(see ill. 7). Chain only runs if handguard brake is

released.

• Oil does not f ow: Check the oil level. Clean the oil

ﬂ ow openings in the bar (see also the corresponding

hints of “Maintenance and servicing). If this is not

successful, take the chain saw to a specialised work-

shop.

Attention: Any maintenance or repair work

going beyond that described in these Operating

Instructions may only be carried out by autho-

rised persons or a specialised workshop.

Attention: If the power supply lead of this

device shows any defects, the lead must be

replaced by an authorized repair shop only or

a specialised workshop, as this work requires

special tools.

8. Repair Service

Repairs to electric power tools should only be carried out

by specialist electrical personnnel.

9. Waste disposal and environmental protection

If your device should become useless somewhere in the

future or you do not need it any longer, do not dispose

of the device together with your domestic refuse, but

dispose of it in an environmentally friendly manner.

Please dispose of the device itself at an according collec-

ting/recycling point. By doing so, plastic and metal parts

can be separated and recycled. Information concerning

the disposal of materials and devices are available from

your local administration.

10. Warranty

For this electric tool, the company provides the end user

- independently from the retailer‘s obligations

resulting from the purchasing contract - with the following

warranties:

The warranty period is 24 months beginning from the

hand-over of the device which has to be proved by

the original purchasing document. For commercial use

and use for rent, the warranty period is reduced to

12 months. Wearing parts and defects caused by the use

of not ﬁ tting accessories, repair with parts that are

no original parts of the manufacturer, use of force, stro-

kes and breaking as well as mischievous overloading

of the motor are excluded from this warranty. Warranty

replacement does only include defective parts,

not complete devices. Warranty repair shall exclusively

be carried out by authorized service partners or a spe-

cialised workshop. In the case of any intervention of not

authorized personnel, the warranty

will be held void.

EC declaration of conformity

The EC declaration of conformity on a separate piece of

paper forms part of this original instruction.

Содержание

Похожие устройства

Do not store the saw outdoors or in damp and moist areas Check all the chain saw parts in particular the chain bar and sprocket of wear after every use Ensure that the chain tension is correct If the chain is too loose it may come off during use and lead to injuries The chain must be replaced immediately if it is damaged The cutting teeth must be at least 4 mm long Check the motor housing and power cable after every use for damage If there is any sign of damage have the chain saw checked by a specialised workshop Check the oil level and lubrication of your chain saw after every use Insufficient lubrication leads to damage to the chain bar and motor Check how keen the chain is every time before you use the chain saw A blunt chain will cause overheating of the motor Sharpening a saw chain requires experience and spe cialised knowledge We therefore recommend to have sharpening carried out by a specialised workshop 10 Warranty For this electric tool the company provides the end user independently from the retailer s obligations resulting from the purchasing contract with the following warranties The warranty period is 24 months beginning from the hand over of the device which has to be proved by the original purchasing document For commercial use and use for rent the warranty period is reduced to 12 months Wearing parts and defects caused by the use of not fitting accessories repair with parts that are no original parts of the manufacturer use of force stro kes and breaking as well as mischievous overloading of the motor are excluded from this warranty Warranty replacement does only include defective parts not complete devices Warranty repair shall exclusively be carried out by authorized service partners or a spe cialised workshop In the case of any intervention of not authorized personnel the warranty will be held void 7 In the case of technical problems The machine does not start up Check whether the current socket is live Check whether the power cable is undamaged If neither case applies take the chain saw to a specialised workshop Chain does not run Check position of handguard see ill 7 Chain only runs if handguard brake is released Oil does not f ow Check the oil level Clean the oil flow openings in the bar see also the corresponding hints of Maintenance and servicing If this is not successful take the chain saw to a specialised work shop EC declaration of conformity The EC declaration of conformity on a separate piece of paper forms part of this original instruction Attention Any maintenance or repair work C J going beyond that described in these Operating Instructions may only be carried out by autho rised persons or a specialised workshop Attention If the power supply lead of this device shows any defects the lead must be replaced by an authorized repair shop only or a specialised workshop as this work requires special tools 8 Repair Service Repairs to electric power tools should only be carried out by specialist electrical personnnel 9 Waste disposal and environmental protection If your device should become useless somewhere in the future or you do not need it any longer do not dispose of the device together with your domestic refuse but dispose of it in an environmentally friendly manner Please dispose of the device itself at an according collecting recyding point By doing so plastic and metal parts can be separated and recycled Information concerning the disposal of materials and devices are available from your local administration GB 8

Скачать