Neff D99L11N0 [12/52] Cleaning and care
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Neff D99L11N0 [12/52] Cleaning and care

Neff D99L11N0 [12/52] Cleaning and care
12
Cleaning and care
몇 LOOKING AFTER THE APPLIANCE
Suitable cleaning agents and care products
for your appliance can be purchased via the
Hotline or from the Online Shop (see cover
page).
Appliance surfaces
NOTE: Observe the warranty regulations in
the enclosed service booklet.
The appliance surfaces and controls are
scratch-sensitive. Therefore observe the
following cleaning instructions:
– Avoid cleaning the extractor hood with dry
cloths, abrasive sponges, scouring agents,
cleaning agents containing sand, soda,
acid, chlorine or any other aggressive
substances.
– Clean the appliance surfaces and controls
with a soft, damp cloth, washing-up liquid
or a mild window cleaner only.
– Do not scrape o dried dirt, but moisten
with a damp cloth.
– Clean carefully in the area of the controls
to avoid liquid from getting into the
electronics.
NOTE: Clean the stainless steel surfaces in
the direction of the ground surface only!
Do not use stainless steel cleaner for the
control buttons!
Looking after the appliance
Suitable cleaning agents and care
products for your appliance can be
purchased via the Hotline or from the
Online Shop (see cover page).
Metal-mesh grease lters
The inserted metal-mesh grease lters
absorb the grease particles from the kitchen
fumes.
The lter mats consist of re-proof metal.
몇 RISK OF FIRE
As the lters become more saturated with
greasy residue, the ammability increases.
The function of the extractor hood may also
be impaired.
The risk of re is prevented by cleaning
the metal-mesh grease lters in good time.
When cleaning the grease lters, also
remove grease deposits from the accessible
parts of the housing with a damp cloth.
Cleaning the metal-mesh
grease lters ...
Under normal operation (daily 1 to 2
hours), the metal-mesh grease lters must
be cleaned 1x month.
... in the dishwasher
The metal-mesh grease lters can be
cleaned in the dishwasher. Slight
discolouration may occur but this will not
aect the function of the grease lters.
The lters must be placed loosely in the
dishwasher. They must not be wedged in.
NOTE: Do not clean heavily saturated metal-
mesh grease lters together with utensils.
... by hand
When cleaning by hand, soak the grease
lters in a hot detergent solution, brush o
the dirt, rinse thoroughly and leave to dry.
Do not use any aggressive, acidic or
alkaline cleaning agents.
If dirt is particularly stubborn, we
recommend using a special grease solvent
spray. This can be ordered via the Online
Shop.
Removing and installing the grease lters
Before removing and installing the grease
lters, always follow the instructions and
warnings in the chapter entitled “Safety
instructions”!
Removing and installing the metal-mesh
grease lters
1. Open the lock and fold down the grease
lters. In doing so, hold the underside of
the grease lters with your other hand.
2. Clean the grease lters.
3. Reinsert the cleaned grease lters.
Changing the activated carbon lter
Under normal operation (daily 1 to 2
hours) the activated carbon lters must be
replaced approximately 2x year.
The activated carbon lter is available
from specialist outlets, customer service or
the Online Shop (see Optional accessories).
Use original lters only.
Activated carbon lters do not contain
any pollutants. They can be disposed of in
the household refuse.
1. Remove metal-mesh grease lter.
2. Unlock ue duct on both sides and
slide downwards.
3. Remove both activated-carbon lters
forwards and replace.
4. Push ue duct upwards until it clicks
into position.

Содержание

Похожие устройства

Скачать