Zanussi W802 [17/76] Emergency emptying out

Zanussi W802 [17/76] Emergency emptying out
ENGLISH
17
5. Emergency emptying out
If the water is not discharged (outlet pump is
blocked, filter or drain hose are clogged), proceed as
follows to empty out the machine:
pull out the plug from the power socket;
close the water tap;
if necessary, wait until the water has cooled down;
place a bowl on the floor under the filter;
slightly loosen the filter to let the water come out
slowly;
at the end screw the filter again.
6. Frost precautions
If the machine is installed in a place where the
temperature could drop below 0°C, proceed as
follows:
Close the water tap and unscrew the water inlet
hose from the tap.
Place the end of the drain hose and that of the inlet
hose in a bowl placed on the floor.
Select programme “P” (draining) and run it until the
machine stops.
Switch the machine OFF by depressing button .
Screw the water inlet hose back on and put the
drain hose back in its place.
By doing this, any water remaining in the machine is
removed, avoiding the formation of ice and,
consequently, breakage of the affected parts.
When you use the machine again, make sure that
the ambient temperature is above 0°C.
132995520•gb.qxd 10-01-2002 17:09 Pagina 17

Содержание

ENGLISH 5 Emergency emptying out If the water is not discharged outlet pump is blocked filter or drain hose are clogged proceed as follows to empty out the machine pull out the plug from the power socket close the water tap if necessary wait until the water has cooled down place a bowl on the floor under the filter slightly loosen the filter to let the water come out slowly at the end screw the filter again 6 Frost precautions If the machine is installed in a place where the temperature could drop below 0 C proceed as follows Close the water tap and unscrew the water inlet hose from the tap Place the end of the drain hose and that of the inlet hose in a bowl placed on the floor Select programme P draining and run it until the machine stops Switch the machine OFF by depressing button Î Screw the water inlet hose back on and put the drain hose back in its place By doing this any water remaining in the machine is removed avoiding the formation of ice and consequently breakage of the affected parts When you use the machine again make sure that the ambient temperature is above 0 C 17

Скачать