Zanussi W802 [6/76] Description of the appliance

Zanussi W802 [6/76] Description of the appliance
1 Detergent dispenser drawer
2 Programme chart
3 Control panel
4 Drain filter
5 Adjustable feet
6
This could be done by tying it to the tap with a piece
of string or attaching it to the wall.
In a sink drain pipe branch. This branch must be
above the trap so that the bend is at least 60 cm
above the ground.
Directly into a drain pipe at a height of not less
than 60 cm and not more than 90 cm.
The end of the drain hose must always be
ventilated, i.e. the inside diameter of the drain pipe
must be larger than the outside diameter of the drain
hose.
P0022
The drain hose must not be kinked. Run it along the
floor; only the part near the drainage point must be
raised.
Electrical connection
This machine is designed to operate on a 220-230 V,
single-phase, 50 Hz supply.
Check that your domestic electrical installation can
take the maximum load required (2.2 kW), also
taking into account any other appliances in use.
Connect the machine to an earthed socket.
The manufacturer declines any responsibility
for damage or injury through failure to comply
with the above safety precaution.
Should the appliance power supply cable
need to be replaced, this should be carried
out by our Service Centre.
The power supply cable must be easily
accessible after installing the machine.
P0023
Description of the appliance
132995520•gb.qxd 10-01-2002 17:09 Pagina 6

Содержание

The drain hose must not be kinked Run it along the floor only the part near the drainage point must be raised This could be done by tying it to the tap with a piece of string or attaching it to the wall In a sink drain pipe branch This branch must be above the trap so that the bend is at least 60 cm above the ground Electrical connection Directly into a drain pipe at a height of not less than 60 cm and not more than 90 cm The end of the drain hose must always be ventilated i e the inside diameter of the drain pipe must be larger than the outside diameter of the drain hose This machine is designed to operate on a 220 230 V single phase 50 Hz supply Check that your domestic electrical installation can take the maximum load required 2 2 kW also taking into account any other appliances in use Connect the machine to an earthed socket The manufacturer declines any responsibility for damage or injury through failure to comply with the above safety precaution Should the appliance power supply cable need to be replaced this should be carried out by our Service Centre The power supply cable must be easily accessible after installing the machine Description of the appliance 1 Detergent dispenser drawer 2 Programme chart 3 Control panel 4 Drain filter 5 Adjustable feet 6

Скачать