Fluke FLK-116 [11/24] Power up options

True-rms Multimeter

Power-Up Options

When you turn the Meter on, it defaults to Autorange and

Auto is displayed.

1. To enter the Manual Range mode, press q.

Manual is displayed.

2. In the Manual Range mode, press qto increment the

range. After the highest range, the Meter wraps to the

lowest range.

Note

You cannot manually change the range in the

MIN MAX AVG or Display HOLD modes.

If you press qwhile in MIN MAX AVG or

Display Hold, the Meter beeps twice, indicating

an invalid operation, and the range does not

change.

3. To exit Manual Range, press q for at least 1 second

or turn the rotary switch. The Meter returns to

Autorange and Auto is displayed.

Power-Up Options

To select a Power-Up Option, hold down the button

indicated in the following table while turning the Meter on.

Power-Up Options are canceled when you turn the Meter

off and when sleep mode is activated.

Button Power-Up Options

Turns on all display segments.

Disables beeper. bEEP is displayed when

enabled.

Enables low impedance capacitance

measurements. LCAP is displayed when

enabled. See page 14.

Disables automatic power-down ("Sleep

mode"). PoFF is displayed when enabled.

Disables auto backlight off. LoFF is

displayed when enabled.

Making Basic Measurements

The figures on the following pages show how to make

basic measurements.

When connecting the test leads to the circuit or device,

connect the common (COM) test lead before connecting

the live lead; when removing the test leads, remove the live

lead before removing the common test lead.