Haier HWE06XCN [6/25] Warning

4.Warning and Cautions

Warning and Cautions

renoitidnoC riA citsemoD

Electrical shock hazard

•

Plug into a mating, grounded 3 prong outlet.

• Do not remove the ground prong from the power supply cord.

Do not use a plug adapter, extension cord, surge protector, or multi-outlet adapter

Failure to follow these instructions can result in injury, ﬁre, or electrical shock.

WARNING

1. DO NOT cut or remove the grounding prong on the attached power supply cord. Doing so may cause sparks or ﬁre,

and voids all warranties. For safety purposes the air conditioner must be properly grounded.

2. To avoid a ﬁre hazard or possible electric shock, DO NOT use an adapter plug, extension cord,surge protectors, or

multi-outlet adapters with the air conditioner.

3. The power supply cord is equipped with a 3-prong plug which mates with a standard 115 volt wall outlet to minimize

the possibility of electrical shock from this air conditioner.

4. The power supply cord includes a leakage current detection interrupter device (LCDI). A RESET and TEST button are

on the plug case. The device should be tested on a periodic basis by pressing the TEST button and then the RESET

button while it is plugged into the wall outlet. If the TEST button does not trip or the RESET will not stay engaged,

do not use the air conditioner and contact a qualiﬁed service technician.

5. Have the wall outlet and circuit inspected by a qualiﬁed electrician to ensure that the wall outlet is properly grounded.

6. If there is a 2-prong wall outlet present and not a 3-prong wall outlet, it is the responsibility of the user to have it

replaced with a properly grounded 3-prong outlet.

The air conditioner should always be plugged into a dedicated electrical outlet which has a voltage rating that matches

the serial label on the side of the air conditioner.

8. The electrical ratings for your air conditioner are listed on the Model/Serial Number label. The Model/Serial Number

label is located on the side of the air conditioner cabinet, or behind the front grille.

9. Speciﬁc electrical requirements are listed in the chart below. Follow the requirements for the type of plug on the

power supply cord.

ELECTRICAL REQUIREMENTS

Recommended grounding method

Power supply cord

This air conditioner must be grounded. This air conditioner is equipped with a power supply cord that has a 3 prong

grounding plug. The power supply cord must be plugged into a mating, grounded 3 prong outlet, and grounded in

accordance with all local codes and ordinances. If a mating outlet is not available, it is the customer’s responsibility to

contact a qualiﬁed electrician and ensure that a properly grounded 3 prong outlet is installed.

This room air conditioner is equipped with an a leakage current detection interrupter ( LCDI) power supply cord required

by UL. This power supply cord contains a current detection device. If the power supply cord is crushed, this device will

detect current leakage and power will be disconnected from the air conditioner. If this power supply cord is damaged, it

cannot be repaired and must be replaced with a cord from the product manufacturer.