Comprag MEX-E-2 [15/84] Preparation of compressed air line

CONTRACOR

MEX Сondensate removal system

Warning!

If the aforementioned deciencies or defects are discovered, contact the supplier of your

system for clarication on further action.

4. Usage

4.1 Preparation of compressed-air line

Connect the system to the compressed-air line. Provide the throughput capacity of the

compressed-air line in accordance with the performance of the compressor.

Warning!

All components of the compressed-air line must have a working pressure no less than the

nominal pressure of the condensat removal system.

4.2 Before use and on a daily basis

1. Open the condensate drain ball valves (8) and (18) and drain the condensate fully;

2. Close the ball valve;

3. Drain the condensate from the lter of the air-preparation unit (only for MEX-P models);

4. Check the oil level in the lubricator of the air-preparation unit (only for MEX-P models);

5. Close all ball valves on the distributing header (5);

6. Ensure the system’s power cable is intact (only for MEX-E models);

7. Ensure that the compressed air hoses are connected to the compressed-air inlet and

outlet.