Philips HR7770 [6/132] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Philips HR7770 [6/132] English

Philips HR7770 [6/132] English
7 When you have nished processing, turn the speed selector to
0 (Fig. 4).

- Use the feeding tube to add liquid and/or solid ingredients. (Fig. 5)
- Use the pusher to push solid ingredients down the feeding
tube. (Fig. 6)
Tip: You can also use the pusher to close the feeding tube. This prevents
ingredients from escaping through the feeding tube.

You can use the blade unit to chop, mix, blend or puree ingredients.
1 Remove the protective cover from the blade (Fig. 7).
The cutting edges are very sharp. Do not touch them.
2 Put the tool holder in the bowl. (Fig. 8)
3 Put the blade unit on the tool holder in the bowl (Fig. 9).
4 Put the ingredients in the bowl. Pre-cut large pieces of food into
pieces of approx. 3 x 3 x 3cm (Fig. 10).
Note: Always put the tool holder with the blade unit in the bowl before you
add the ingredients.
5 Put the lid on the bowl (1). Turn the lid clockwise (2) to x it
(‘click’) (Fig. 11).
Note: Make sure the projection on the lid locks into the slot of the bowl
handle.
6 Put the pusher in the feeding tube.
7 Select the speed that corresponds with the colour of the
accessory (Fig. 12).
8 When you have nished processing, turn the speed selector to 0
and unplug the appliance (Fig. 4).
6

- When you chop onions, turn the speed selector to P (pulse
position) a few times to prevent the onions from becoming too nely
chopped (Fig. 13).
- Do not let the appliance run too long when you chop (hard) cheese
or chocolate. Otherwise these ingredients become too hot, start to
melt and turn lumpy.
- Do not use the blade unit to chop very hard ingredients like coffee
beans, turmeric, nutmeg and ice cubes, as this may cause the blade to
get blunt.
- If food sticks to the blade or to the wall of the bowl, switch off the
appliance and unplug it. Then use a spatula to remove the food from
the blade or from the wall of the bowl.

You can use the kneading accessory to knead yeast dough for bread and
pizzas.
1 Put the tool holder in the bowl (Fig. 8).
2 Put the kneading accessory on the tool holder. (Fig. 14)
Note: Always put the tool holder with the kneading accessory in the bowl
before you add the ingredients.
3 Put the ingredients in the bowl (Fig. 15).
4 Put the lid on the bowl (1). Turn the lid clockwise (2) to x it
(‘click’) (Fig. 16).
Note: Make sure the projection on the lid locks into the slot of the bowl
handle.
5 Put the pusher in the feeding tube.
6 Select the speed that corresponds with the colour of the
accessory (Fig. 17).
7 When you have nished processing, turn the speed selector to 0
and unplug the appliance (Fig. 18).

Содержание

Похожие устройства

Скачать