Skil 7660 NA Инструкция по эксплуатации онлайн [7/112] 92737
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Skil 7660 NA Инструкция по эксплуатации онлайн [7/112] 92737

Skil 7660 NA Инструкция по эксплуатации онлайн [7/112] 92737
7
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc., in
accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations dierent
from those intended could result in a hazardous situation.
5) SERVICE
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
SAFETY INSTRUCTIONS FOR SANDERS
• Avoid damage that can be caused by screws, nails and
other elements in your workpiece; remove them before
you start working
• Always keep the cord away from moving parts of the tool;
direct the cord to the rear, away from the tool
• Secure the workpiece (a workpiece clamped with
clamping devices or in a vice is held more securely than
by hand)
• When you put away the tool, switch o the motor and
ensure that all moving parts have come to a complete
standstill
• Use completely unrolled and safe extension cords with a
capacity of 16 Amps (U.K. 13 Amps)
• In case of electrical or mechanical malfunction,
immediately switch o the tool and disconnect the plug
• SKIL can assure awless functioning of the tool only
when the correct accessories are used which can be
obtained from your SKIL dealer
• This tool should not be used by people under the age of
16 years
• The noise level when working can exceed 85 dB(A); wear
ear protection
• Hold power tool by insulated gripping surfaces,
because the belt may contact its own cord (cutting a
“live” wire may make exposed metal parts of the power
tool “live” and could give the operator an electric shock)
• If the cord is damaged or cut through while working, do
not touch the cord, but immediately disconnect the plug
• Never use the tool when cord is damaged; have it
replaced by a qualied person
• Always check that the supply voltage is the same as the
voltage indicated on the nameplate of the tool (tools with
a rating of 230V or 240V can also be connected to a
220V supply)
• This tool is not suitable for wet sanding
• Do not work materials containing asbestos (asbestos
is considered carcinogenic)
• Regularly clean the power tool’s air vents (the
motor’s fan will draw the dust inside the housing and
excessive accumulation of powdered metal may cause
electrical hazards)
• Dust from material such as paint containing lead, some
wood species, minerals and metal may be harmful
(contact with or inhalation of the dust may cause allergic
reactions and/or respiratory diseases to the operator or
bystanders); wear a dust mask and work with a dust
extraction device when connectable
• Certain kinds of dust are classied as carcinogenic (such
as oak and beech dust) especially in conjunction with
additives for wood conditioning; wear a dust mask and
work with a dust extraction device when
connectable
• Follow the dust-related national requirements for the
materials you want to work with
• When sanding metal, sparks are generated; do not use
dustbag/vacuum cleaner and keep other persons and
combustible material from work area
• Do not touch the running sanding belt
• Do not continue to use worn, torn or heavily clogged
sanding belts
• Wear protective gloves, safety glasses, close-tting
clothes and hair protection (for long hair)
• Alwaysdisconnectplugfrompowersourcebefore
making any adjustment or changing any accessory
WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):
• Do not connect the blue (= neutral) or brown (= live) wire
in the cord of this tool to the earth terminal of the plug
• If for any reason the old plug is cut o the cord of this tool,
it must be disposed of safely and not left unattended
USE
• On/o switch
- switch on/o the tool by pulling/releasing trigger A 2
! before the sanding surface reaches the
workpiece, you should switch on the tool
! before switching off the tool, you should lift it
from the workpiece
• Switch locking for continuous use
- pull trigger A 2
- press knob B 2 with your thumb
- release the trigger
- unlock the switch by pulling again trigger A 2 and
then releasing it
• Speed control 4
For optimal sanding results on dierent materials
- with wheel C 2 you can set the desired sanding
speed
- adjust speed to grit size used
- before starting a job, nd the optimal speed and grit by
testing out on spare material
• Changing of sanding belts 5
! disconnect the plug
- lift lever D
- remove sanding belt
- insert new belt with arrows printed at inner side of belt
pointing in same direction as arrow E on tool
- push lever back
! change sanding belts in time

Содержание

Похожие устройства

Regularly clean the power tool s air vents the motor s fan will draw the dust inside the housing and excessive accumulation of powdered metal may cause electrical hazards Dust from material such as paint containing lead some wood species minerals and metal may be harmful contact with or inhal ation of the dust may cause all ergi c reactions and or respiratory diseases to the operator or bystanders wear a dust mask and work with a dust extraction device when connectable Certain kinds of dust are classified as carcinogenic such as oak and beech dust especially in conjunction with additives for wood conditioning wear a dust mask and work with a dust extraction device when connectable Follow the dust related national requirements for the materials you want to work with When sanding metal sparks are generated do not use dustbag vacuum cleaner and keep other persons and combustible material from work area Do not touch the running sanding belt Do not continue to use worn torn or heavily clogged sanding belts Wear protective gloves safety glasses close fitting clothes and hair protection for long hair Always disconnect plug from power source before making any adjustment or changing any accessory WHEN CONNECTING NEW 3 PIN PLUG U K ONLY Do not connect the blue neutral or brown live wire in the cord of this tool to the earth terminal of the plug If for any reason the old plug is cut off the cord of this tool it must be disposed of safely and not left unattended d Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these Instructions to operate the power tool Power tools are dangerous in the hands of untrained users e Maintain power tools Check for misalignment or binding of moving parts breakage of parts and any other condition that may affect the power tool s operation If damaged have the power tool repaired before use Many accidents are caused by poorly maintained power tools f Keep cutting tools sharp and clean Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control g Use the power tool accessories and tool bits etc In accordance with these Instructions taking Into account the working conditions and the work to be performed Use of the power tool for operations different from those intended could result in a hazardous situation 5 SERVICE a Have your power tool serviced by a qualified repair person using only identical replacement parts This will ensure that the safety of the power tool is maintained SAFETY INSTRUCTIONS FOR SANDERS Avoid damage that can be caused by screws nails and other elements in your workpiece rem we them before you start working Always keep the cord away from moving parts of the tool direct the cord to the rear away from the tool Secure the workpiece a workpiece clamped with clamping devices or in a vice is held more securely than by hand When you put away the tool switch off the motor and ensure that all moving parts have come to a complete standstill Use completely unrolled and safe extension cords with a capacity of 16 Amps U K 13 Amps In case of electrical or mechanical malfunction immediately switch off the tool and disconnect the plug SKIL can assure flawless functioning of the tool only when the correct accessories are used which can be obtained from your SKIL dealer This tool should not be used by people under the age of 16 years The noise level when working can exceed 85 dB A wear ear protection Hold power tool by insulated gripping surfaces because the belt may contact Its own cord cutting a live wire may make exposed metal parts of the power tool live and could give the operator an electric shock If the cord is damaged or cut through while working do not touch the cord but immediately disconnect the plug Never use the tool when cord is damaged have it replaced by a qualified person Always check that the supply voltage is the same as the voltage indicated on the nameplate of the tool tools with a rating of 230V or 240V can also be connected to a 220V supply This tool is not suitable for wet sanding Do not work materials containing asbestos asbestos is considered carcinogenic USE On off switch switch on off the tool by pulling releasing trigger A I before the sanding surface reaches the workpiece you should switch on the tool I before switching off the tool you should lift It from the workpiece Switch locking for continuous use pull trigger A press knob B with your thumb release the trigger unlock the switch by pulling again trigger A and then releasing it Speed control For optimal sanding results on different materials with wheel C you can set the desired sanding speed adjust speed to grit size used before starting a job find the optimal speed and grit by testing out on spare material Changing of sanding belts I disconnect the plug littlever D remove sanding belt insert new belt with arrows printed at inner side of belt pointing in same direction as arrow E on tool push lever back change sanding belts In time 7

Скачать