![Zoom H1n Limited Edition [2/71] Usage and safety precautions](/img/pdf.png)
Zoom H1n Limited Edition [2/71] Usage and safety precautions
![Zoom H1n Limited Edition [2/71] Usage and safety precautions](/views2/2007847/page2/bg2.png)
Usage and Safety Precautions
In this operation manual, symbols are used to highlight warnings and cautions that you must read to prevent
accidents. The meanings of these symbols are as follows.
WARNING
Something that could cause serious injury or
death
CAUTION
Something that could cause injury or damage to
the equipment
Other symbols used
An action that is mandatory An action that is prohibited
WARNING
■
Operation with batteries
Use 2 commercially-available AAA batteries (alkaline dry cell batteries, NiMH batteries or lithium dry cell
batteries).
Carefully study the warning indications of the batteries before use.
Always keep the battery and SD card covers closed during use.
■
Alterations
Do not open the case or modify the product.
CAUTION
■
Product handling
Do not drop, bump or apply excessive force to the unit.
Be careful not to allow foreign objects or liquids to enter the unit.
■
Battery handling
Installbatterieswiththecorrect+/−orientations.
Usethespeciedbatteries.
Donotusenewandoldbatteriestogether.Donotusebatteriesofdierentbrandsortypestogether.
Remove the batteries when the unit will not be used for a long time.
Ifaleakoccurs,thoroughlywipethebatterycaseandbatteryterminalstoremovetheleakeduid.
■
Operating environment
Do not use in extremely high or low temperatures.
Do not use near heaters, stoves and other heat sources.
Do not use in very high humidity or where it could be splashed by water.
Do not use in places with frequent vibrations.
Do not use in places with much dust or sand.
■
Volume
Do not use at a loud volume for a long time.
■
Interference with other electrical equipment
In consideration of safety, the has been designed to minimize its emission of electromagnetic waves and to
suppress interference from external electromagnetic waves. However, equipment that is very susceptible to inter-
ference or that emits powerful electromagnetic waves could result in interference if placed nearby. If this occurs,
place the
and the other device farther apart.
With any type of electronic device that uses digital control, including the , electromagnetic interference could
cause malfunction, corrupt or destroy data and result in other unexpected trouble. Always use caution.
1
Содержание
- Operation manual 1
- Alterations 2
- Battery handling 2
- Caution 2
- Interference with other electrical equipment 2
- Operating environment 2
- Operation with batteries 2
- Other symbols used 2
- Product handling 2
- Usage and safety precautions 2
- Volume 2
- Warning 2
- Breakdown and malfunction 3
- Cleaning 3
- Copyrights 3
- Declaration of conformity declaration of conformity 3
- Fcc regulation warning for u s a 3
- For eu countries 3
- Additional recording functions from other models 4
- Advanced playback functions 4
- Display with great visibility and language localization 4
- Introduction 4
- Overdubbing function 4
- Straightforward interface 4
- Usb audio interface that uses asynchronous transfer 4
- Xy mic 4
- Contents 5
- Names of parts 6
- This has two crossing directional mics this mic can record a three dimensional sound with natural depth and width 6
- This shows various types of information 6
- Use this to operate the function shown 1st from the left at the bottom of the display 6
- Use this to operate the function shown 2nd from the left at the bottom of the display 6
- Use to adjust the input level 6
- ① built in xy mic 6
- ② input volume dial 6
- ③ display 6
- ④ audio button 6
- ⑤ lo cut button 6
- Left and right sides 8
- Display overview 9
- Recording screen 9
- Playback screen 10
- Preparations 11
- Providing power 11
- Using batteries 11
- Using an ac adapter 12
- Close the microsd card slot cover 13
- Insert the microsd card into the card slot 13
- Inserting microsd cards 13
- To remove a microsd card push it further into the slot and then pull it out 13
- Turn the power off and then open the microsd card slot cover 13
- This turns the power on and opens the recording screen 14
- Turning the power off 14
- Turning the power on 14
- Turning the power on off 14
- Setting the language shown 15
- This completes setting the language 15
- This opens the setting screen 15
- Setting the date and time 16
- This opens the setting screen 16
- This completes setting the date and time 17
- Activating the hold function 18
- Deactivating the hold function 18
- Preventing misoperation 18
- Adjusting input levels 19
- Adjusting levels manually 19
- Recording 19
- Using automatic level adjustment 20
- Press to select the recording format 21
- Selecting the recording format 21
- The display shows the selected recording format and the remaining possible recording time 21
- The following recording formats can be set 21
- The recording format can be selected in consideration of audio quality and file size 21
- Reducing noise 22
- Setting the limiter 23
- Recording 24
- The following operations are possible during recording 24
- This ends recording 24
- Recording automatically auto rec 25
- This will start automatic recording standby 25
- Using additional recording functions 25
- Capturing audio before recording starts pre rec 26
- This starts recording the input signal from 2 seconds earlier 26
- Press to end recording standby or stop recording 27
- Recording starts automatically after the set time passes 27
- Recording with the self timer 27
- This starts the self timer countdown and the rec led blinks 27
- While pressing press to set the timer 27
- Enabling the sound mark function 28
- Adjusting connected equipment levels playing test tones 29
- This plays a test tone from the phone line out jack 29
- This stops the test tone 29
- While checking the audio level meter of the connected device make small adjustments to the input gain of that device until the audio signal level is about 6 db 29
- Overdubbing 30
- This starts overdubbing 30
- This stops overdubbing 30
- Monitoring recording 31
- This starts recording 32
- Using external mics 32
- Playback 33
- Playback stops and the recording screen opens 33
- Playing recordings 33
- The following operations are possible during playback 33
- Adjusting the volume 34
- Just the file currently playing or all the files saved on the microsd card can be played back repeatedly 35
- Press to set the repeat type 35
- The following repeat types can be used 35
- Using repeat playback 35
- Deleting marks 36
- The function button on the far left changes from mark to delete mark 36
- The selected mark will be deleted 36
- Checking file information 37
- Press and to change the page 37
- This reopens the playback screen 37
- Adjusting the playback position precisely 38
- Go back 3 seconds press 38
- Go forward 10 seconds press 38
- This activates play mode 38
- Using additional playback functions 38
- Changing the playback speed 39
- This activates play mode 39
- Press on the playback screen 40
- Press to exit play mode 40
- Press to select the sound effect to use 40
- The following sound effects can be activated 40
- These effects can be applied to change the sound during playback 40
- This activates play mode 40
- Using sound effects 40
- A will appear at the set point 41
- B will appear at the set point and repeat playback between the a and b points will start 41
- Repeat playback of a set interval a b repeat 41
- This activates play mode 41
- You can also press and move the position during playback 41
- Deleting files 43
- The selected file will be deleted 43
- Working with files 43
- Connecting with other devices 44
- The usb screen will open 44
- Using usb functions 44
- Mac os drag the icon to the trash and drop it 45
- This ends card reader operation and reopens the recording screen 45
- Using as a card reader 45
- Windows select from safely remove hardware 45
- Using as an audio interface 46
- Disconnect the usb cable from the and the other equipment 47
- Monitoring playback signals from connected devices 47
- The following power sources can be selected 47
- This ends audio interface operation and reopens the recording screen 47
- To disconnect while pressing press 47
- Use and to select exit and press 47
- Enabling direct monitoring 48
- Making various settings 49
- Opening the setting screen 49
- This opens the setting screen 49
- Setting the date format 50
- The following date formats can be used 50
- On the setting screen use and to select lcd and press 51
- Setting the display backlight 51
- The display backlight can be set to turn off after a specific amount of time without use 51
- The time until the backlight turns off can be set as follows 51
- Use and to select backlight and press 51
- Use and to set the amount of time until the backlight turns off and press 51
- Adjusting the display contrast 52
- Setting the type of battery used 53
- On the setting screen use and to select auto power off and press 54
- Setting the auto power off function 54
- Use and to set the time until the power turns off and press 54
- When operating with batteries the power will automatically turn off if it is not used for a set amount of time 54
- Setting how the counter appears 55
- On the setting screen use and to select rec setting and press 56
- Setting how files are named 56
- The following file name formats can be used 56
- The way that files are named automatically during recording can be changed 56
- Use and to select file name and press 56
- Use and to select the file name format and press 56
- Formatting microsd cards 57
- Other functions 57
- This opens the setting screen 57
- This formats the microsd card for use with the 58
- Conducting a quick test 59
- Testing microsd card performance 59
- This opens the setting screen 59
- The result of the evaluation is shown 60
- This starts a quick test of the microsd card 60
- Conducting a full test 61
- This opens the setting screen 61
- The amount of time required for the full test will be shown 62
- The result of the evaluation is shown 62
- This starts a full test of the microsd card 62
- Checking the versions 63
- This opens the setting screen 63
- After the settings are reset the power will automatically turn off 64
- Restoring default setting values 64
- This opens the setting screen 64
- This starts resetting the 64
- The firmware update starts 65
- This opens an update execution confirmation screen 65
- Updating the firmware 65
- After the firmware update completes turn the power off 66
- Adding languages 67
- This opens the setting screen 67
- The selected language will be added 68
- Use and to select the language you want to add and press 68
- Computer does not recognize the even though they are connected by a usb cable 69
- No sound is output volume is low 69
- Other trouble 69
- Recorded sound cannot be heard or is very quiet 69
- Recording not possible 69
- Recording playback trouble 69
- Troubleshooting 69
- Specifications 70
- Zoom corporation 71
Похожие устройства
- Zoom G3Xn Руководство по эксплуатации
- Yerasov SCS FZ-10 Руководство по эксплуатации
- Yerasov SCS-PB-8 Руководство по эксплуатации
- Yerasov SCS PH-10 Руководство по эксплуатации
- Yerasov MARVEL 30H Руководство по эксплуатации
- Zoom AC-3 Руководство по эксплуатации
- Yerasov LILLIPUT 3 Руководство по эксплуатации
- Yerasov BULL 412 R L Руководство по эксплуатации
- Yerasov IGOR BOIKO signature Руководство по эксплуатации
- Yerasov RF-1 Руководство по эксплуатации
- Yerasov FETube Eddie\'s Higain EH-5 Руководство по эксплуатации
- Yerasov BULL 412 Руководство по эксплуатации
- Yerasov 7000 Volt mini Руководство по эксплуатации
- Yerasov BULL 112 G Руководство по эксплуатации
- Yamaha YDP-S52WH Руководство по эксплуатации
- Yamaha YEV104BL Руководство по эксплуатации
- Yamaha YDP-S34B Руководство по эксплуатации
- Yamaha YDP-164WA Руководство по эксплуатации
- Yamaha YDP-S34WH Руководство по эксплуатации
- Yamaha YVS-100 Руководство по эксплуатации