Faber ZOOM PLUS 345.0492.568 [28/36] En 2 8

FIXING THE POWER SUPPLY CABLE

• Tighten the power supply cable and fix it to the

Bracket on the ceiling mounted Plate, using the

tongue already mounted and 2 screws.

• Slot the rubber cable raceway already

threaded onto the power cable into the

slot to prevent future damage.

• Connect the Hood to the

Mains Power Supply,

inserting a bipolar switch

with a contact aperture of

at least 3 mm.

• Remove the Grease filters

(see paragraph

“Maintenance”) and make

sure that the Power cable

has been properly inserted

into the Suction fan

socket.

• At this point it is possible

to remove the clamp

fastening the power cable

to the Hood Canopy.

• At this point it is possible to connect up the hood, and the lamp if there is one, to the power

supply using the respective power cables.

FITTING THE PLATE COVER

• Close the plate cover using the 3

screws removed previously and

the wrench provided