ADJ Hydro Beam X1 [31/40] Adj products llc www adj com hydro beam x1 user manual page 30

ADJ Products, LLC - www.adj.com - Hydro Beam X1 User Manual Page 30

Hydro Beam X1 System Menu

System Menu: When making adjustments press ENTER to conrm your setup. To exit without

making any adjustments press the MENU button. The display will lock after 30 seconds, press

the MENU button for 3 seconds to unlock.

DMX SETTINGS - The submenus listed under DMX SETTINGS are as follows: DMX Address, DMX

Channel Mode, No DMX Status, and Select Signal.

- DMX ADDRESS - In this submenu you can use the UP or DOWN buttons to adjust and nd your

desired DMX address.

- DMX CHANNEL MODE - In this submenu you can use the UP or DOWN buttons to nd your

desired DMX channel mode.

- NO DMX STATUS - This submenu setting is used as a precaution mode in case the DMX signal is

lost or interrupted. The operating mode chosen in this submenu is the running mode the xture

will go into when the DMX signal is lost. Listed below are the 3 modes.

• HOLD LAST - This setting will have the xture stay in the last DMX setup.

• BLACKOUT - This setting will have the xture automatically go into stand by mode.

• MANUAL - This setting will go into the current manual control set up. See MANUAL CONTROL.

PERSONALITY - The submenus listed under PERSONALITY are as follows: Select Signal, Status

Settings, WiFly Settings, Reset Motors, Display, and Service.

- SELECT SIGNAL - In this submenu you can select your desired DMX control mode:

• DMX - Control the unit via DMX cable connection.

• WiFly - Control the unit via WiFly.

• WiFly / DMX Out - Control the unit via WiFly connection. The DMX signal is sent to the next unit

via DMX cable.

- STATUS SETTINGS - In this submenu you are able to access and adjust/change: Pan Invert, Tilt

Invert, P./T. Feedback, Pan Degree (no adjustment), P./T. Speed, and Hibernation.

- WIFLY SETTINGS - In this submenu you are able to access and adjust/change: WiFly Channel setting

and Enable/Disable WiFly.

- RESET MOTORS - In this submenu you are able to reset selected motors.

- DISPLAY - In this submenu you are able to access and adjust/change: Backlight Intensity, Display

Invert, Screen Saver Delay, and Display Lock.

- SERVICE - In this submenu you are able to access and adjust/change: calibration setting, USB

power activation, update the software, and restore the factory settings.

MANUAL CONTROL - This menu is for manual testing and manual control. Pan, tilt, color wheel,

gobo wheel, prism, prism rotation, shutter, dimmer, and frost can all be tested/adjusted.