Stihl MSA 220 16 [72/216] After finishing work

Stihl MSA 220 16 [72/216] After finishing work
0458-795-9621-A
70
English
12 After Finishing Work
Shout a warning.
With arms outstretched, cut through the holding strap from
outside at a downward angle.
The tree falls.
11.4.10 Felling a large diameter leaner
A leaner is felled with a felling cut and holding strap. This
felling cut must be performed if the tree diameter is greater
than the guide bar’s length.
Shout a warning.
Apply the spiked bumper behind the holding strap at the
same height as the felling cut and use it as a pivot.
Hold the saw horizontally and swing it into the felling cut
as far as possible.
Enlarge felling cut in direction of hinge.
Enlarge felling cut in direction of holding strap.
Move to the other side of the tree.
Apply the spiked bumper behind the hinge at the same
height as the felling cut and use it as a pivot.
Hold the saw horizontally and swing it into the felling cut
as far as possible.
Enlarge felling cut in direction of hinge.
Enlarge felling cut in direction of holding strap.
Shout a warning.
With arms outstretched, cut through the holding strap from
outside at a downward angle.
The tree falls.
12.1 After Finishing Work
Switch off the chain saw, engage the chain brake and
remove the battery.
If the saw is wet: Allow the saw to dry.
If the battery is wet: Allow the battery to dry.
Clean the saw.
Clean the bar and chain.
Loosen the wingnut.
Rotate the adjusting wheel two full turns
counterclockwise.
The chain is now slack.
Tighten down the wingnut.
Fit the scabbard so that it completely covers the guide bar.
Clean the battery.
5
2 3
1
6
4
0000-GXX-4454-A0
12 After Finishing Work
0000-GXX-4455-A0

Содержание

Похожие устройства

Скачать