Haier HOQ-F3AAN3GB [94/107] To fit 1 ensure the slides are the correct way around the front of the slide has the triangular shaped tab as shown 2 fit the top of the clips over the side rack the front...

Haier HOQ-F3AAN3WB белая [94/0] To fit 1 ensure the slides are the correct way around the front of the slide has the triangular shaped tab as shown 2 fit the top of the clips over the side rack the front clip should be fitted as close to the front of the side rack as possible make sure the rear clip has engaged 3 rotate the slide down and click the bottom of the clips into place
39
Бүйірлік тіреуді орнына қою:
1. Бүйірлік тіреудің артқы істіктерін тұмшапештің арт жағындағы
саңылауларға орнатыңыз.
2. Бүйірлік тіреудің алдыңғы таянышын бекіткіш бұранданың үстіне
қойыңыз.
3. Бекіткіш сомынды орнына қойыңыз. Сомынды тарту үшін, монетаны
пайдалануға болады.
38
Replace the side rack:
1. Slide the rear prongs of the side rack into the holes at the rear of
the oven.
2. Fit the side rack front tab over the xing screw.
3. Replace the xing nut. You may use a coin to tighten the nut.
Fixing nut
Side rack
Rear prongs
Removing and retting the sliding shelf supports (purchased
separately)
IMPORTANT!
C
ompact ovens only:
The sliding shelf supports cannot be used on shelf positions 3 and 4.
To t
1. Ensure the slides are the correct way around (the front of the
slide has the triangular shaped tab as shown).
2. Fit the top of the clips over the side rack, the front clip should be
tted as close to the front of the side rack as possible. Make sure
the rear clip has engaged.
3. Rotate the slide down and ‘click’ the bottom of the clips into
place.
pilCpilC
TabTab
Бүйірлік тіреу
Артқы істіктер
Бекіткіш сомын
Сөрелердің сырғымалы тіреулерін алу және қайта орнату (бөлек сатып
алынады)
МАҢЫЗДЫ!
Тек шағын тұмшапештер үшін:
Сөрелердің сырғымалы тіреулері 3 және 4-қалыпта қолданылмайды.
Орнату
1. Бағыттағыштардың дұрыс орналасқанына (бағыттағыштың алдыңғы
бөлігінде суретте көрсетілгендей үшбұрыш пішінді дөңес болу керек) көз
жеткізіңіз.
2. Қысқыштардың жоғарғы бөлігін бүйірлік тіреулердің үстіне қойыңыз.
Алдыңғы қысқыш бүйірлік тіреудің алдыңғы шетіне барынша жақын
орналасуға тиіс. Артқы қысқыштың бекітілгеніне көз жеткізіңіз.
3. Бағыттағышты төмен бұрып, қысқыштардың төменгі бөлігін “сырт
еткенше” қойыңыз.
Қысқыш
Қысқыш
Дөңес
Дөңес

Содержание

Похожие устройства

Скачать