Kuppersberg VBMF 96 [31/58] Please note

Kuppersberg VBMF 96 [31/58] Please note
31
ENGLISH TECHNICAL PASSPORT
Built-in Freezer
7. BEFORE CALLING AFTER
-
SALES SERVICE
If you are experiencing a problem with
your freezer, please check the following
before contacting the after-sales service.
The appliance does not operate
Check if:
 There is power
 The mains is connected
 The thermostat setting is on the “•”
position
 The socket is defective. To check this,
plug another working appliance into the
same socket.
The appliance performs poorly
Check if:
 The appliance is overloaded
 The appliance door is closed properly
 There is any dust on the condenser
 There is enough space near the rear
and side walls.
The appliance is noisy
The cooling gas which circulates in
the freezer circuit may make a slight noise
(bubbling sound) even when the compressor
is not running. Do not worry, this is normal.
If you hear a different sound, check whether:
 The appliance is level
 Anything is touching the rear of the
appliance
 Objects in the appliance are
vibrating.
Recommendations
 If the appliance is switched off or
unplugged, wait at least 5 minutes before
plugging the appliance in or restarting it in
order to prevent damage to the compressor.
 If you will not use your freezer for a
long time (e.g. in summer holidays) unplug
it. Clean your freezer according to chapter
cleaning and leave the door open to prevent
humidity and smell.
 If a problem persists after you have
followed all the above instructions, please
consult the nearest authorised service
centre.
 The appliance you have purchased
is designed for domestic use only. It is not
suitable for commercial or common use.
If the consumer uses the appliance in a
way that does not comply with this, we
emphasise that the manufacturer and the
dealer will not be responsible for any repair
and failure within the guarantee period.
Please note!
The following shall not be considered as defects of the Product
Refrigerators
Discoloration of product materials when using the product
Noise of owing coolant during compressor operation
Minor technical smells of plastic coming from a new product
Blushing of plastic and aging of rubber elements of the product over time

Содержание

Скачать