Ryobi EMS254L 5133001202 Инструкция по эксплуатации онлайн [4/168] 851032
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Ryobi EMS254L 5133001202 Инструкция по эксплуатации онлайн [4/168] 851032

Ryobi EMS254L 5133001202 Инструкция по эксплуатации онлайн [4/168] 851032
English
2
Ŷ Always disconnect the plug from the socket before
carrying out any work on the machine.
Ŷ Only plug-in when machine is switched off.
Ŷ Keep mains lead clear from working range of the
machine. Always lead the cable away behind you.
Ŷ Sawdust and splinters must not be removed while the
machine is running.
Ŷ Never reach into the danger area of the plane when it
is running.
Ŷ Before use, check machine, cable, and plug for any
damages or material fatigue. Repairs should only be
carried out by authorised service agents.
Ŷ Always use the protective shields on the machine.
Ŷ Do not clamp the protective swing guard.
Ŷ Do not use saw blades which are damaged or deformed.
Ŷ Replace the table insert when worn.
Ŷ Do not use saw blades not corresponding to the key
data given in these instructions for use.
Ŷ The protective cover should only open when the
machine is lowered to the workpiece.
Ŷ Do not use saw blades made of high-speed steel.
Ŷ Before work, make a dummy cut without the motor
turned on so the position of the blade, operation of the
guards with respect to other machine parts and work
piece may be checked.
Ŷ When performing mitre, bevel or compound mitre cuts,
adjust the sliding fence to ensure the correct clearance
from the blade.
Ŷ Any faults with the machine, including any related to
the safeguard or the saw blades, must be reported to
the persons in charge of safety as soon as the faults
are discovered.
Ŷ It is necessary to select a saw blade which is suitable
for the material being cut.
Ŷ Never use the mitre saw to cut materials other than
those specified in the instruction manual.
Ŷ The handle lock must always be engaged when
transporting the mitre saw.
Ŷ Only use the saw with guards in good working order
and properly maintained, and in position.
Ŷ Keep the floor area free of loose material e.g. chips and
cut-offs.
Ŷ Only use saw blades which have been properly
sharpened. It is essential to adhere to the maximum
speed specified on the saw blade.
Ŷ Do not use any flanges other than those supplied or
indicated in the instruction manual to secure the saw
blade.
Ŷ Refrain from removing any cut-offs or other parts of the
workpiece from the cutting area whilst the machine is
running and the saw head is not in the rest position.
Ŷ Ensure that the machine is always stable and secure
(e.g. fixed to a bench).
Ŷ Long workpieces must be adequately supported.
Ŷ Do not use cracked or distorted saw blades.
Ŷ Before using the tool please read the instructions. If
possible have the tool demonstrated.
Ŷ The dust produced when using this tool may be harmful
to health. Use a dust absorption system and wear a
suitable dust protection mask. Remove deposited dust
thoroughly, e.g. with a vacuum cleaner.
Ŷ Stock having a round or irregular cross section (such
as firewood) must not be cut, as it cannot be securely
held during cutting. When sawing thin stock layered on
edge, a suitable auxiliary fence must be used for firm
support.
Ŷ The unit should be connected to a circuit protection
device (fuse or circuit breaker).
Ŷ Always wear safety goggles or safety glasses with side
shields during power tool operation or when blowing
dust. If operation is dusty, also wear a dust mask.
Ŷ Take care when trenching.
Ŷ Always use blades with correct size and shape of
arbour holes. Blades that do not match the mounting
hardware of the saw will run eccentrically, causing loss
of control.
Ŷ Use only blades specified in this manual, complying
with EN 847-1.
Ŷ Do not replace the laser or LED with a different type. Any
repairs must only be carried out by the manufacturer or
authorised service agent.
Ŷ A power spike causes voltage fluctuations and may
affect other electrical products in the same power
line. Connect the product to a power supply with an
LPSHGDQFH HTXDO WR  ȍ WR PLQLPL]H YROWDJH
fluctuations. Contact your electric power supplier for
further clarification.
SAFETY INSTRUCTIONS FOR WOOD CUTTING
BLADE
Ŷ Please read the manual and instructions carefully
before using the saw blade and the machine.
Ŷ The machine must be in good condition, the spindle
without deformation and vibration.
Ŷ Do not use the saw without the guards in position, keep
guards in good working order and properly maintained.
Ŷ Ensure the operator is adequately trained in safety
precautions, adjustment and operation of the machine.
Ŷ Always wear goggles and ear protection when using the
machine. It is recommended to wear gloves, sturdy non
slipping shoes and apron.
Ŷ Before using any accessory, consult the instruction
manual. The improper use of an accessory can cause
damage and increase the potential for injury.
Ŷ Use only blades specified in this manual, complying
with EN 847-1.
Ŷ Observe the maximum speed marked on the saw

Содержание

Похожие устройства

Always disconnect the plug from the socket before carrying out any work on the machine Long workpieces must be adequately supported Only plug in when machine is switched off Before using the tool please read the instructions If possible have the tool demonstrated Keep mains lead clear from working range of the machine Always lead the cable away behind you Sawdust and splinters must not be removed while the machine is running Never reach into the danger area of the plane when it is running Before use check machine cable and plug for any damages or material fatigue Repairs should only be carried out by authorised service agents Always use the protective shields on the machine Do not use saw blades which are damaged or deformed Replace the table insert when worn Do not use saw blades not corresponding to the key data given in these instructions for use The protective cover should only open when the machine is lowered to the workpiece Do not use saw blades made of high speed steel Before work make a dummy cut without the motor turned on so the position of the blade operation of the guards with respect to other machine parts and work piece may be checked When performing mitre bevel or compound mitre cuts adjust the sliding fence to ensure the correct clearance from the blade Any faults with the machine including any related to the safeguard or the saw blades must be reported to the persons in charge of safety as soon as the faults are discovered It is necessary to select a saw blade which is suitable for the material being cut Never use the mitre saw to cut materials other than those specified in the instruction manual engaged The dust produced when usi ng th is tool may be harmful to health Use a dust absorption system and wear a suitable dust protection mask Remove deposited dust thoroughly e g with a vacuum cleaner Stock having a round or as firewood must not be held during cutting When edge a suitable auxiliary support irregular cross section such cut as it cannot be securely sawing thin stock layered on fence must be used for firm The unit should be connected to a circuit protection device fuse or circuit breaker Do not clamp the protective swing guard The handle lock must always be transporting the mitre saw Do not use cracked or distorted saw blades when Only use the saw with guards in good working order and properly maintained and in position Keep the floor area free of loose material e g chips and cut offs Only use saw blades which have been properly sharpened It is essential to adhere to the maximum speed specified on the saw blade Do not use any flanges other than those supplied or indicated in the instruction manual to secure the saw blade Refrain from removing any cut offs or other parts of the workpiece from the cutting area whilst the machine is running and the saw head is not in the rest position Ensure that the machine is always stable and secure e g fixed to a bench Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust If operation is dusty also wear a dust mask Take care when trenching Always use blades with correct size and shape of arbour holes Blades that do not match the mounting hardware of the saw will run eccentrically causing loss of control Use only blades specified in this manual complying with EN 847 1 Do not replace thelaser or LED with a different type Any repairs must only be carried out by the manufacturer or authorised service agent A power spike causes voltage fluctuations and may affect other electrical products in the same power line Connect the product to a power supply with an impedance equal to 0 180 0 to minimize voltage fluctuations Contact your electric power supplier for further clarification SAFETY BLADE INSTRUCTIONS FOR WOOD CUTTING Please read the manual and instructions before using the saw blade and the machine carefully The machine must be in good condition the spindle without deformation and vibration Do not use the saw without the guards in position keep guards in good working order and properly maintained Ensure the operator is adequately trained in safety precautions adjustment and operation of the machine Always wear goggles and ear protection when using the machine It is recommended to wear gloves sturdy non slipping shoes and apron Before using any accessory consult the instruction manual The improper use of an accessory can cause damage and increase the potential for injury Use only blades specified in this manual complying with EN 847 1 Observe the maximum speed marked on the saw

Скачать