Home
Главная
Ballu-Biemmedue
Теплогенератор
GE105
Инструкция по эксплуатации Страница: 14

Ballu-Biemmedue GE105 [14/28] Troubleshooting

TROUBLESHOOTING

PROBLEM

RESET BUTTON (13)

CAUSE

REMEDY

• Motor does not start, no

ignition

FUNCTION LIGHT

• Off

SELF-DIAGNOSIS LIGHT

• Wrong setting of room thermostat or

other control

• Check correct setting of heater control. If

thermostat, make sure selected temperature is

higher than room temperature

• Defective thermostat or other control

• Replace control device

• Fan does not start or stops

during start-up or heating

• Flashing

orange

• No electrical current

• Check mains

• Check proper positioning and functioning of

switch

• Check fuse

• Voltage below 175V

• Check supply voltage: heater will restart

automatically when voltage exceeds 190 V

• Voltage above 265V

• Check supply voltage: heater will restart

automatically when voltage is below 250 V

• Fan stops during start-up or

heating

• Steady red

• Flashing

orange

• Presence of flame before transformer

ignites

• Clean and eliminate diesel residue in

combustion chamber

• Defective photocell

• Replace photocell

• Flashing red

or flashing

red/green

• Defective electrical motor

• Replace electrical motor

• Defective electrical motor bearings

• Replace electrical motor bearings

• Burned out condenser

• Replace condenser

• Defective electric ignitor

• Check connection of H.T. wires to electrodes

and transformer

• Check electrodes setting (see scheme

“SETTING THE ELECTRODES”)

• Check electrodes for cleanliness

• Replace H.T. transformer

• Defective flame control box

• Replace control box

• Defective photocell

• Clean or replace photocell

• Insufficient or no fuel at burner

• Check state of motor-pump plastic coupling

• Check for any air infiltrations in the fuel line by

checking the air-tightness of the pipes and of the

filter seal.

• Clean or replace oil nozzle

• Defective solenoid

• Defective electric ignitor

• Check electrical connection

• Check thermostat LI

• Clean solenoid valve and replace it if necessary

• Flashing

orange

• Internal error of electronic device

• Reset the device and attempt at least two

starts. If the problem persists, replace the device

• Fan starts and flame lights,

generating fumes

• Steady green

• Insufficient combustion air

• Make sure air inlet and outlet are free

• Check the position of the air regulation ring

• Clean burner disc

• Excess combustion air

• Check the position of the air regulation ring

• Fuel contaminated or contains water

• Drain fuel in tank and load with clean fuel

• Clean oil filter

• Air leaks in fuel circuit

• Check the seals on the ducts and the diesel

filter

• Insufficient fuel at burner

• Check pump pressure

• Clean or replace fuel nozzle

• Excess fuel at burner

• Check pump pressure

• Replace nozzle

• Heater does not stop

• Steady green

• Defective solenoid seal

• Replace complete solenoid

If the heater is still not working properly, please contact your nearest authorized dealer.

Ballu-Biemmedue GE105 [14/28] Troubleshooting

Содержание

Похожие устройства