![Kramer VA-1USB-T [14/25] Resetting the va 1usb t to factory default settings](/img/pdf.png)
Kramer VA-1USB-T [14/25] Resetting the va 1usb t to factory default settings
![Kramer VA-1USB-T [14/25] Resetting the va 1usb t to factory default settings](/views2/1153115/page14/bge.png)
VA-1USB-T/VA-1USB-R - Connecting the VA-1USB-T and VA-1USB-R
11
11
Device ID
Switch Number
1
2
3
4
10
On
Off
On
Off
11
On
Off
On
On
12
On
On
Off
Off
13
On
On
Off
On
14
On
On
On
Off
15
On
On
On
On
5.3 Resetting the VA-1USB-T to Factory Default Settings
To reset the VA-1USB-T to factory default settings:
1. Turn off the power to the device.
2. Press and hold the Reset button while turning on the power to the device.
3. When the Link LED starts to flash, release the Reset button.
The device is reset to factory default settings.
5.4 Resetting the VA-1USB-R to Factory Default Settings
To reset the VA-1USB-R to factory default settings:
1. Turn off the power to the device.
2. Press and hold the Link button while turning on the power to the device.
3. When the Link LED starts to flash, release the Link button.
The device is reset to factory default settings.
Содержание
- User manual 1
- Contents 3
- Figures 3
- Introduction 4
- Achieving the best performance 5
- Getting started 5
- Recycling kramer products 6
- Safety instructions 6
- Shielded twisted pair unshielded twisted pair 6
- Overview 7
- Defining the va 1usb t and va 1usb r usb transmitter and receiver 8
- Defining the va 1usb t usb transmitter 8
- Defining the va 1usb r usb receiver 9
- Figure 2 defines the rear panel of the va 1usb t 9
- Figure 3 defines the front panel of the va 1usb r 9
- From the va 1usb t the receiver distributes the usb signal across four usb 9
- Ports acting as a usb hub and outputs the rs 232 data the va 1usb r 9
- Receives an ir signal via its ir sensor and sends it over the tp link to the 9
- The va 1usb r decodes the usb signal and rs 232 data from the tp link sent 9
- Va 1usb t 9
- Figure 4 defines the rear panel of the va 1usb r 10
- Connecting the va 1usb t and va 1usb r 11
- Connect the rs 232 9 pin d sub port on the va 1usb t va 1usb r via a 13
- Connecting to the product via rs 232 13
- Device id 13
- For example a pc note that a null modem adapter connection is not required 13
- Need to be connected to the rs 232 9 pin d sub port on your pc 13
- Of transmitters and receivers to communicate independently on the same tp 13
- Set each device in a transmitter and receiver pair to the same device id according 13
- Setting the device id dip switch 13
- Subnet 13
- Switch number 13
- The device id dip switch is used on both the va 1usb t transmitter and 13
- To connect to the va 1usb t va 1usb r via rs 232 13
- To the following table press a switch up to turn it on and down to turn it off 13
- Va 1usb r receiver to set matching device numbers this allows up to 16 pairs 13
- Wire straight cable only pin 2 to pin 2 pin 3 to pin 3 and pin 5 to pin 5 13
- You can connect to the va 1usb t va 1usb r via an rs 232 connection using 13
- Device id 14
- Press and hold the link button while turning on the power to the device 14
- Press and hold the reset button while turning on the power to the device 14
- Resetting the va 1usb r to factory default settings 14
- Resetting the va 1usb t to factory default settings 14
- Switch number 14
- The device is reset to factory default settings 14
- To reset the va 1usb r to factory default settings 14
- To reset the va 1usb t to factory default settings 14
- Turn off the power to the device 14
- When the link led starts to flash release the link button 14
- When the link led starts to flash release the reset button 14
- Accessing the va 1usb t va 1usb r embedded web pages 15
- Using the web pages 15
- The system tab 16
- The network tab 18
- The functions tab 19
- Reboot the device by clicking on utilities and clicking reboot 20
- The device is rebooted with the new ip parameters 20
- Connectors 21
- Shield figure 16 defines the tp pinout using a straight pin to pin cable with rj 45 21
- When using stp cable connect solder the cable shield to the rj 45 connector 21
- Wiring the twisted pair rj 45 connectors 21
- Technical specifications 22
- Default communication parameters 23
Похожие устройства
- Rover MS-DVE1внеш Инструкция по эксплуатации
- Kramer VA-1USB-R Руководства по эксплуатации
- Rover Par E419L C1.5 Инструкция по эксплуатации
- Kramer VA-130FW Руководства по эксплуатации
- Kramer PT-100 Руководства по эксплуатации
- Kramer PT-101HDCP Руководства по эксплуатации
- Kramer PT-101Hxl Руководства по эксплуатации
- Kramer PT-2H Руководства по эксплуатации
- Kramer PT-101DP Руководства по эксплуатации
- Kramer 611T Руководства по эксплуатации
- Rover MediaM1(256+SD) Инструкция по эксплуатации
- Rover Media DP300 256 Инструкция по эксплуатации
- Rover Media Ar DP300/1G Инструкция по эксплуатации
- Rover Media Ar X5 512Mb Инструкция по эксплуатации
- Rover Nav W570W Pm1.8 Инструкция по эксплуатации
- Rover M1 Инструкция по эксплуатации
- Rowenta PH 098 Инструкция по эксплуатации
- Rowenta PH 241 Инструкция по эксплуатации
- Rowenta Infinium RS-921 Инструкция по эксплуатации
- Rowenta ES 180 Инструкция по эксплуатации