Home
Главная
Stiga
Электрический Триммер
ESB 1000 J 291820102/06
Инструкция по эксплуатации Страница: 14

Stiga ESB 1000 J 291820102/06 [14/100] Etb 1000j

ETB 1000J

4. GENERAL SAFETY NORMS

 Read the instructions carefully. Become familiar

with the commands and the machine. Users

who ignore the safety, operating and mainte-

nance instructions are responsible for damage

and consequent losses.

Do not let children come into contact

with the tool. Keep all the people away

from the work area.

 Keep all bystanders at least 15 m away from

the unit during operation.

 Before starting, make sure that the cutting head

is not in contact with anything, such as a

branch, stone.

 Use the unit only in daylight or good artificial

light.

 Be aware of the risk of injury ta the head, hands

and feet.

 When working with the unit, always wear sturdy,

rubber-soled footwear and body protection ap-

propriate to operation of the unit.

 Bear in mind that the owner or user is responsi-

ble for accidents or risks involving other people

or their property.

 When working with the unit, use the safety at-

tachments supplied.

 Never use the appliance barefooted or wearing

sandals. Never use the appliance when wearing

loose clothing that could get caught up in it.

When working, wear long trousers, safety boots

or shoes with non-slip soles, goggles and a

shield protecting your face from flying objects,

gloves (preferably leather) and anti-noise ear

muffs or helmet. In work areas where there is a

risk of falling objects, protect your head with a

safety helmet.

 Before starting, adjust the handle to your size.

 Do not overreach. Keep proper footing and bal-

ance at all times.

 Maintenance and repair operations, as well as

replacement of the cord or safety devices, must

always be performed with the motor switched

off and the power cable disconnected from the

socket.

 Frequently inspect the condition of the cutting

head, All damaged parts must immediately be

replaced.

 Follow all the required precautions when under-

taking replacement.

 Use only replacement parts recommended by

the manufacturer.

 All guards must be installed properly before op-

erating the unit.

 Attention ! Danger! The cord head or the continu-

ous blade continues to rotate for a few mo-

ments after the switch is released.

 Keep unit clean of vegetation and other materi-

als.

 Keep connecting wires away from the tools.

 Turn off the unit and pull the main plug before

set-up or cleaning of the unit, and before testing

for tangled or damaged wires.

 Always disconnect the appliance from the

socket when leaving it unattended.

 Regularly check the cables for damage or wear.

Before use, make sure that the cable and ex-

tension cable are not damaged or worn. If the

cable is damaged during use, do not touch it but

disconnect it from the power supply immedi-

ately.

 The unit must not be used if the connecting

wires are not in perfect condition.

Length

0÷30 m

30÷70 m

70÷140 m

Cross-section

1,5 mm

2,5 mm

4,0 mm

 The appliance may only be cleaned and the cord

head adjusted with the motor switched off and

the plug disconnected from the power supply.

Make sure the ventilation slots are kept clean

and unobstructed.

 Cord Sets - Make sure your cord set is in good

condition. When using a cord set, be sure to use

a cord that is heavy enough to carry the current

that your unit wilI draw. An undersized cord set

will cause a drop in line voltage resulting in

power and overheating. The table (below) shows

the correct size to use depending on the cord

length and nameplate amperage rating. If in

doubt, use the next heavier size Iine gauge. The

smaller the gauge number, the heavier the cord.

 Only switch on the appliance if your hands and

feet are well away from the cutting area.

 The appliance must be checked and serviced

regularly; repairs may only be made by an au-

thorised repairman.

 Do not mount blades comprising several pieces.

Only one-piece blades may be used.

 Do not mount saw blades.

 Do not mount blades with a diameter of more

than 230 mm.

 Take precautions against the risk of injury from

the cutting device which adjusts the length of

the cord.

 Put unused tools away. When not in use, store

the tool high up in a dry closed room, out of

reach of children.

 Switch the motor off when transporting the ma-

chine.

 Cover the teeth of the blade with the blade

guard when transporting the machine over long

distances.

 For reasons of safety, connect the tool to a

power socket protected by a differential switch

with a max. current of 30 mA.

 Never grip the tool above your hips; never lift a

machine while the blade is still turning.

 Check the work area before starting work; re-

move any stones, broken glass, nails, wires and

other solid objects that may be caught and

ejected by the cutting device.

5. DESCRIPTION OF MACHINE PARTS

FIG. 1

The packing contains:

1. Motor casing

2. ON-OFF switch

3. Safety button

4. Power cable

5. Hook for strap

6. Spacer

7. Front grip

8. Guard

9. Guard extension when using the cord head

10. Cord head (B) & metal blade (A)

11. Cord length adjustment blade

12. Warning label

13. Rating plate

14. Connector

15. Carrier strap

02_inglese.p65 13/01/2006, 9.4814

Stiga ESB 1000 J 291820102/06 [14/100] Etb 1000j

Содержание

Похожие устройства