Moxa AWK-4121-EU-T [6/89] Awk 4121 introduction

Moxa AWK-4121-EU-T [6/89] Awk 4121 introduction
AWK-4121 Introduction
1-2
Overview
The AWK-4121 outdoor wireless Access Point is an ideal solution for industrial applications that are hard to wire,
too expensive to wire, or use mobile equipment that connect to a TCP/IP network.
The AWK-4121 is rated for operation in the temperature range from -40 to 75°C, and its dust-tight and
weatherproof design is IP68-rated. An IP68 rating means the device is completely protected from dust and is
protected against the effects of immersion in water between 15cm and 1m in depth. This means you can set up
a WLAN or extend existing wired networks to outdoor locations and still maintain a reliable connection. The
AWK-4121 has two redundant DC power inputs for increased reliability, can be powered via PoE (discontinued
starting with HW Rev 2.0.0), and is easy to deploy.
Package Checklist
Moxa’s AWK-4121 is shipped with the following items. If any of these items is missing or damaged, please
contact your customer service representative for assistance.
AWK-4121
Omni-directional antennas (5/2 dBi, N-type male, 2.4/5 GHz)
Wall mounting kit
Field-installable power plug
Field-installable RJ45 plug
Metal cap to cover M12 female DI/O connector
Metal cap to cover RJ45 connector
Quick installation guide (printed)
Warranty card
NOTE
The above items come with the
AWK-4121 standard version. The package contents may vary in different
customized versions.
Product Features
IEEE802.11a/b/g compliant
Three-in-one design (AP/Bridge/Client)
Advanced wireless security:
64-bit and 128-bit WEP encryption, WPA /WPA2-Personal and Enterprise
(IEEE 802.1X/RADIUS, TKIP, and AES)
SSID enable/disable
Packet access control & filtering
STP/RSTP support for redundancy of system networking (for Master and Slave mode only)
Long-distance transmission support
Turbo Roaming enables rapid handover (for Client mode only)
ABC-01 for configuration import/export
Customized antenna selection
RS-232 console management
2DI+1DO for onsite monitoring and warming
Operating temperature range from -40 to 75°C
Power input via PoE (discontinued starting with HW Rev 2.0.0) or redundant 24 VDC power inputs
Wall mounting ability

Содержание

Похожие устройства

Скачать