Moxa V2616A-C8-CT-W7E [76/111] Creating a custom system image

V2616A Linux System Recovery

7-10

Creating a Custom System Image

The procedure below describes a configuration for restoring a complete system that has been customized with

user applications and scripts. Here, you will save to the USB drive a copy of the entire system as it is currently

configured to be used as a full system recovery image should the system crash. During this process, all files

on your USB that are mounted under

F:\home\partimag\ will be overwritten.

You should have already changed the BIOS settings to set the USB drive as the first boot priority. If you have

not yet reset the boot priority, first return to Step 2: Setting the BIOS to Boot via USB and follow the

directions there.

1. Once the system has launched and the V2616A has booted the recovery environment from the USB drive,

navigate to the entry Clonezilla Live Save Disk, and select it by pressing Enter. This will take you into the

recovery image creation environment, allowing you to copy your full system setup to the USB drive.

2. The V2616A will now boot into the image creation environment. Wait for the boot process to finish.

3. Once the image creation environment has completed booting up, you will be given a warning and asked if

you wish to continue. Please keep in mind that if you create the recovery image, then any residual files

currently copied to the /home/partimag directory will be deleted. If there are any files remaining in the USB

partition image directory and you wish to save them, you must exit the recovery environment and copy

these files to another disk. If you wish to continue with the image creation, press Y (case insensitive) to

continue (screenshot on the next page).