Intel rms25cb080 [20/60] Installing the intel integrated raid module rms25cb0x0

10 Intel® Integrated RAID Module RMS25PB0x0 and RMS25CB0x0 Hardware User’s Guide

6. Install the server system cover and connect the power cords. See your server system

documentation for instructions.

Installing the Intel

Integrated RAID Module

RMS25CB0x0

To install the RAID module, follow these steps:

1. Turn off the power to the system, all drives, enclosures, and system components.

Remove the power cord(s).

2. Remove the server cover. For instructions, see your server system documentation.

3. Insert the four barrel standoffs into the matching holes in the server board. To locate

the matching module card slot on your server board, see your server board

documentation. The Intel

Server Board S2600IP is shown for illustrative purpose.

Actual standoff hole locations could be different (see

Figure 1).

Figure 4. Installing the Barrel Standoff

4. Attach the RAID to the matching server board connector, and press the module card

firmly to engage the barrel standoffs installed in step 3 (see

Figure 3). Press down

gently but firmly to ensure that the card is properly seated in the connectors, and

then insert the four pin standoffs into the barrel standoffs respectively. The Intel

RAID Module RMS25CB080 is shown for illustrative purpose (see

Figure 5).

AF004406