Home
Главная
Indesit
Сушильная Машина
ISL 70 C
Инструкция по эксплуатации Страница: 10

Indesit ISL 70 C [10/96] Maintenance and care

Maintenance and Care

Cleaning the drum

! Do not use abrasives, steel wool or stainless steel

cleaning agents to clean the drum.

A coloured film may start to appear on the stainless

steel drum, this may be caused by a combination of

water and, or cleaning agents such as fabric conditioner

from the wash. This coloured film will not affect the

dryer performance.

Cleaning the condenser unit

Periodically (every month) remove the condenser unit

and clean any build up of fluff from between the plates

by rinsing it under the tap with cold water.

This should be done with cold water from the rear of

the condenser.

Removing the condenser:

1. Unplug the dryer and open the door.

2. Pull open the condenser cover (see diagram).

Release the three catches by turning 90˚ counter-

clockwise then pull on the grip and remove from

the dryer.

3. Clean the surface of the seals and replace, making

sure that the catches have been secured.

Cleaning the dryer

●

External parts in metal or plastic and rubber parts

can be cleaned with a damp cloth.

●

Periodically (every 6 months) vacuum the front air

intake grille and vents at the rear of the dryer, to

remove any build up of fluff, lint or dust. Also to

remove accumulation of fluff from the front of the

condenser and filter areas, clean occasionally with

a vacuum cleaner.

! Do not use solvents or abrasives.

! Your dryer uses special bearing components which

do not need lubrication.

! Have your dryer checked regularly by authorised

technicians to ensure electrical and mechanical safety

(see Service).

Switching off the electricity

! Unplug your dryer when not using it, when cleaning

it and during all maintenance operations.

Clean the filter after each cycle

The filter is an important part of your dryer:

it accumulates lint and fluff that is formed while drying.

When finished drying, clean the filter by rinsing it

under running water or with your vacuum cleaner.

Should the filter become clogged up, the airflow inside

the dryer will be seriously compromised: drying times

lengthen and you will consume more energy. It may

also damage your dryer.

The filter is found in front of the dryer trim (see diagram).

Removing the filter:

1. Pull the plastic grip of the filter upwards (see diagram).

2. Clean the filter and replace it correctly.

Ensure the filter is fully located flush into the tumble

dryer trim.

! Do not use the dryer without replacing the filter.

Empty the water container after each

cycle

Pull the container out of the dryer and empty it into a

sink or other suitable drain.

Replace the water container securely.

Always check and empty the container before you

start a new drying programme.

Check the drum after each cycle

Turn the drum manually in order to remove small items

(handkerchiefs) that could have been left behind.

Water container

Handle

Condenser cover

Catches

Air intake

Filter

Tap

Rear

Front

Condenser unit

Содержание

Похожие устройства

Maintenance and Care GB Switching off the electricity Cleaning the drum Unplug your dryer when not using it when cleaning it and during all maintenance operations Do not use abrasives steel wool or stainless steel cleaning agents to clean the drum Clean the filter after each cycle A coloured film may start to appear on the stainless steel drum this may be caused by a combination of water and or cleaning agents such as fabric conditioner The filter is an important part of your dryer it accumulates lint and fluff that is formed while drying When finished drying clean the filter by rinsing it under running water or with your vacuum cleaner from the wash This coloured film will not affect the dryer performance Should the filter become clogged up the airflow inside the dryer will be seriously compromised drying times lengthen and you will consume more energy It may also damage your dryer Cleaning the condenser unit The filter is found in front of the dryer trim see diagram Removing the filter 1 Pull the plastic grip of the filter upwards see diagram 2 Clean the filter and replace it correctly Ensure the filter is fully located flush into the tumble dryer trim Do not use the dryer without replacing the filter Periodically every month remove the condenser unit and clean any build up of fluff from between the plates by rinsing it under the tap with cold water This should be done with cold water from the rear of the condenser Removing the condenser 1 Unplug the dryer and open the door 2 Pull open the condenser cover see diagram Release the three catches by turning 90 counter clockwise then pull on the grip and remove from the dryer 3 Clean the surface of the seals and replace making Empty the water container after each cycle sure that the catches have been secured Pull the container out of the dryer and empty it into a sink or other suitable drain Cleaning the dryer Replace the water container securely Always check and empty the container before you start a new drying programme External parts in metal or plastic and rubber parts can be cleaned with a damp cloth Periodically every 6 months vacuum the front air intake grille and vents at the rear of the dryer to remove any build up of fluff lint or dust Also to remove accumulation of fluff from the front of the condenser and filter areas clean occasionally with a vacuum cleaner Do not use solvents or abrasives Your dryer uses special bearing components which do not need lubrication Have your dryer checked regularly by authorised technicians to ensure electrical and mechanical safety see Service Check the drum after each cycle Turn the drum manually in order to remove small items handkerchiefs that could have been left behind Condenser unit 10

Скачать

Случайные обсуждения

Ответы 0

Как включать машину?

6 лет назад

Ответы 0

Не поступает влага в емкость сбора конденсата?

5 лет назад

Ответы 0

Все индикаторы мигают , машинка не включается, что делать?

2 года назад

Ответы 1