Karcher KMR 1250 LPG 2SB [39/160] Maintenance tasks
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Karcher KMR 1250 LPG 2SB [39/160] Maintenance tasks

Karcher KMR 1250 LPG 2SB [39/160] Maintenance tasks
KMR 1250 LPG User Instructions English
39
!
Safety information applicable to maintenance tasks
Before you begin any maintenance tasks, please read the enclosed leaflet
Safety Information No. 5.956-250.
!
Caution! Make sure engine cannot be started unintentionally.
In order to prevent the engine from being started unintentionally, proceed as
follows after you have parked the sweeper.
n Pull out the ignition key.
n Open the unit cover.
n First of all disconnect the cable from the negative terminal (–), then dis-
connect the positive terminal (+).
Note:
When reconnecting the battery, proceed in reverse order – connect the
positive terminal (+) first of all, then the negative terminal (–).
The necessary maintenance tasks or daily inspections can be carried out with
the bonnet raised.
!
Injury hazard!
Do not open the bonnet until the motor has been switched off.
!
Burns hazard!
Take care not to touch the exhaust when you open the bonnet.
!
Injury hazard!
ç If you need to work under the waste container while it is in the raised
position, you must first of all secure the container to prevent it from drop-
ping down unintentionally:
Maintenance tasks
Checking tyre pressures
n Park the sweeper on a level surface.
n Check the air pressure in each tyre and correct it where necessary.
Air pressure for front and rear tyres = 6 bar.
Checking the oil level
n Park the sweeper on a level surface.
ç Pull out the dipstick.
n Wipe the dipstick clean and re-insert it in the filler hole.
n Pull out the dipstick again and check the result.
The oil level should be between the MIN and MAX marks.
If the oil level is below MIN – top up with oil.
If the oil level is above MAX – drain off the surplus.
n Insert the dipstick back into the filler hole.
Filling up with oil
n Pour engine oil type SAE 15 W 40 into the hole for the dipstick.

Содержание

Похожие устройства

User Instructions KMR 1250 LPG English Safety information applicable to maintenance tasks Before you begin any maintenance tasks please read the enclosed leaflet Safety Information No 5 956 250 Caution Make sure engine cannot be started unintentionally In order to prevent the engine from being started unintentionally proceed as follows after you have parked the sweeper Pull out the ignition key Open the unit cover First of all disconnect the cable from the negative terminal then dis connect the positive terminal Note When reconnecting the battery proceed in reverse order connect the positive terminal first of all then the negative terminal The necessary maintenance tasks or daily inspections can be carried out with the bonnet raised A Injury hazard Do not open the bonnet until the motor has been switched off A Burns hazard Take care not to touch the exhaust when you open the bonnet A Injury hazard If you need to work under the waste container while it is in the raised position you must first of all secure the container to prevent it from drop ping down unintentionally Maintenance tasks Checking tyre pressures Park the sweeper on a level surface Check the air pressure in each tyre and correct it where necessary Air pressure for front and rear tyres 6 bar Checking the oil level Park the sweeper on a level surface Pull out the dipstick Wipe the dipstick clean and re insert it in the filler hole Pull out the dipstick again and check the result The oil level should be between the MIN and MAX marks If the oil level is below MIN top up with oil If the oil level is above MAX drain off the surplus Insert the dipstick back into the filler hole Filling up with oil Pour engine oil type SAE 1 5 W 40 into the hole for the dipstick 39

Скачать