Karcher KMR 1250 LPG 2SB [45/160] Troubleshooting

Karcher KMR 1250 LPG 2SB [45/160] Troubleshooting
KMR 1250 LPG User Instructions English
45
Troubleshooting
Problem Possible cause Remedy
Engine does not start
Battery is flat Recharge or replace battery
Gas cylinder empty Replace gas cylinder
Gas cylinder closed Open gas cylinder
Engine oil level is too low Top up with oil
Sweeper does not move
Lever (bypass valve) on
converter transmission is open
Push lever in opposite
direction to travel – see
“Pushing the sweeper by
hand”
Brushes do not rotate
V-belt has snapped Call Customer Service
V-belt is loose Check belt tension and adjust
as required
Main brush or side brush has
been jammed by packing bands
or similar item
Remove blockage
No dust extraction
Fan is not working Check V-belt
Filter is blocked Clean or replace filters
Poor sweeping results
Brushes are worn down Replace brushes
Waste hopper is full Empty waste hopper
Incorrect sweeping pattern Adjust sweeping pattern
Dust is stirred up during
sweeping
Worn out seals on sweeper, filter
not fitted properly or defective
Replace defective seals; fit
filter correctly or replace it
Lifting mechanism for
emptying hopper does not
work
Fuse has blown Replace fuse or inform
Customer Service if fuse
blows repeatedly
Defective switch Inform Customer Service
Defective hydraulic unit Inform Customer Service
Sweeper travels forwards
or backwards even though
drive pedal is not pressed
Neutral position not set up
correctly
Inform Customer Service

Содержание

KMR 1250 LPG User Instructions English Troubleshooting Problem Possible cause Remedy Engine does not start Battery is flat Recharge or replace battery Gas cylinder empty Replace gas cylinder Gas cylinder closed Open gas cylinder Engine oil level is too low Top up with oil Sweeper does not move Lever bypass valve on converter transmission is open Push lever in opposite direction to travel see Pushing the sweeper by hand Brushes do not rotate V belt has snapped Call Customer Service V belt is loose Check belt tension and adjust as required Main brush or side brush has been jammed by packing bands or similar item Remove blockage Fan is not working Check V belt Filter is blocked Clean or replace filters Brushes are worn down Replace brushes Waste hopper is full Empty waste hopper Incorrect sweeping pattern Adjust sweeping pattern Dust is stirred up during sweeping Worn out seals on sweeper filter not fitted properly or defective Replace defective seals fit filter correctly or replace it Lifting mechanism for emptying hopper does not work Fuse has blown Replace fuse or inform Customer Service if fuse blows repeatedly Defective switch Inform Customer Service Defective hydraulic unit Inform Customer Service Neutral position not set up correctly Inform Customer Service No dust extraction Poor sweeping results Sweeper travels forwards or backwards even though drive pedal is not pressed 45

Скачать