ISA Blizzard 1P RV TB [11/30] Installation

BLIZZARD

USE AND MAINTENANCE MANUAL

428000396

137

UPRIGHT DISPLAY CABINETS

4. INSTALLATION

This manual provides information on how to unpack,

position and connect to the power supply.

4.1 Storage and unpacking

The equipment, with or without the packaging, should be carefully stored inside warehouses

or in areas away from the elements and direct sunlight, at a temperature between 0 and

+40°C.

The equipment should only be moved by qualiﬁ ed personnel operating forklift trucks, the

power of which should be suited to handling the weight of the product: during this operation

the equipment MUST be placed on the special pallet supplied.

Unpack the equipment by removing the screws ﬁ xing it to the pallet.

All packaging materials are recyclable and should be disposed of in accordance with local

regulations. Please destroy "plastic" bags to prevent them from becoming hazardous to

children (suffocation).

4.2 Installation, positioning and ambient conditions

Attention

There should be a good air ﬂ ow around the compressor and condensing unit. Therefore the area

around the unit should not be obstructed by boxes or other objects.

Position the equipment away from sources of heat (radiators, all types of ovens, etc.), and away from

draughts (generated for example by fans, air conditioning ducts, etc.).

Also avoid direct exposure to sunlight, or anything that causes the temperature inside the cabinet to

rise with detrimental results to unit operation and energy consumption. Do not use the equipment

outdoors and do not leave it exposed to rain.

4.3 Electrical connection

Attention

Check that the voltage indicated on the appliance is the same as the value on the appliance

identiﬁ cation label and in the table provided in paragraph 2 of this manual, and check that the

required voltage is suitable.

Check on the socket that the power supply voltage provides rated voltage (±10%) when the

compressor is started.

The plug should be directly connected to the electrical socket. It is forbidden to connect the plug to

the socket by means of multiple socket extensions or adaptors.

The electrical system socket must be ﬁ tted with a disconnecting device from the mains (rated for the

load and conform to current standards) to guarantee full disconnection in overloads category III (3)

and ensure protection of the circuits from earth faults, overloads and short circuits.

Do not route the electricity cable in passageways.

Attention

Earthing is necessary and mandatory by law.