Tp-Link TD-W8960NB [27/110] Atm eoa pppoe

TD-W8960NB 300Mbps Wireless N ADSL2+ Modem Router User Guide

)

Note:

1) The following section adopts different VPI, VCI to introduce further configuration for the

different connection types, if you need to change the configuration of ATM PVC (VPI/VCI), you

should go to the previous section (4.4.1

Layer2 Interface) to configure them again.

2) ETH and ATM service can not coexist. If the ETH Interface had configured, you cannot

configure any other WAN service over the ATM Interface until the ETH Interface is deleted.

4.4.2.1 ATM-EoA-PPPoE

If your ISP provides a PPPoE connection and you need to use an ATM Interface, follow the steps

below to add a WAN service over a selected ATM interface:

1. Add a new ATM interface and select EoA option for DSL Link Type (4.4.1.1

ATM interface).

2. Click the Add button on the screen Figure 4-7 and you will enter the next screen as shown in

Figure 4-8. Click Next.

Figure 4-8

3. Select the WAN service type in Figure 4-9. If your ISP provides a PPPoE connection, select

PPPoE option. You can create a service name for the Service Description or leave it the

default name. Click Next.

Figure 4-9