D-Link DGS-1210-52/ME rev.B [205/519] Show fdb

DGS-1210/ME Metro Ethernet Switch CLI Reference Guide

187

DGS-1210-28MP/ME:5# clear flood_fdb

Command: clear flood_fdb

Success.

DGS-1210-28MP/ME:5#

show fdb

Purpose To display the current unicast MAC address forwarding database.

Syntax

show fdb {port <port 1-28> | [vlan <vlan_name 32> | vlanid

<vidlist>] | mac_address <macaddr> | static | aging_time}

Description

The show fdb command displays

the current contents of the

Switch’s forwarding database.

Parameters

<port 1-28> − The port number corresponding to the MAC

destination address. The Switch always forwards

traffic to the

specified device through this port.

[vlan <vlan_name 32> | vlanid <vidlist>] − The name of the VLAN or

the vlan id on which the MAC address resides.

<macaddr> − The MAC address entry in the forwarding table.

static − Specifies that static MAC address entries

are to be

displayed.

aging_time − Displays the aging time for the MAC address

forwarding database.

Restrictions None.

Example usage:

To display unicast MAC address table:

DGS-1210-28MP/ME:5# show fdb port 3

Command: show fdb port 3

VID VLAN Name MAC Address Port Type

---- -------------------------------- -------------------------- ---------------

1 default 00-00-01-01-02-03 3 Permanent

Total Entries : 1

DGS-1210-28MP/ME:5#

To display the aging time:

DGS-1210-28MP/ME:5# show fdb aging_time

Command: show fdb aging_time

Unicast MAC Address Aging Time = 300 (seconds)

DGS-1210-28MP/ME:5#