D-Link DGS-1210-52/ME rev.B [406/519] Config dst
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

D-Link DGS-1210-52/ME rev.B [406/519] Config dst

D-Link DGS-1210-28XS/ME [406/519] Config dst
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
388
DGS-1210-28MP/ME:5# config time 09jan2012 15:50:50
Command: config time 09jan2012 15:50:50
Success.
DGS-1210-28MP/ME:5#
config time_zone operator
Purpose To determine the time zone used in order to adjust the system clock.
Syntax
config time_zone operator [+ hour <gmt_hour 0-13> minute
<minute 0-59> | - hour <gmt_hour 0-12> minute <minute 0-59>]
Description
The config time_zone operator command adjusts the system clock
settings according to the time zone. Time zone settings adjust SNTP
information accordingly.
Parameters
operator – May be (+) to add or (-) to subtract time to adjust for time
zone relative to GMT.
hour <gmt_hour 0-13> – Specifies the number of hours difference
from GMT.
Minute <minute 0-59> – Specifies the number of minutes added or
subtracted to adjust the time zone.
Restrictions Only administrator or operator level users can issue this command.
Example usage:
To configure time zone settings:
DGS-1210-28MP/ME:5# config time_zone operator + hour 2 minute 30
Command: config time_zone operator + hour 2 minute 30
Success.
DGS-1210-28MP/ME:5#
config dst
Purpose To configure time adjustments to allow for the use of Daylight Saving
Time (DST).
Syntax
config dst [disable | [annual s_date <start_date 1-31> s_mth
<start_mth 1-12> s_time <start_time> end_date <int 1-31>
e_mth <end_mth 1-12> e_time <end_time> | offset [30 | 60 | 90 |
120]]]
Description
The config dst command disables or configures Daylight Saving
Time (DST). When enabled, this adjusts the system clock to comply
with any DST requirement. DST adjustment affects system time for
both manually configured time and time set using SNTP service.
Parameters
disable – Disables the DST seasonal time adjustment for the Switch.
annual – Enables DST seasonal time adjustment on an annual
basis. Annual mode requires that the DST beginning and ending
date be specified concisely. For example, specify to begin DST on
April 3 and end DST on October 14. The format for annual mode is
as follows, and in the order listed:

Содержание

Похожие устройства

Скачать
Случайные обсуждения

Ответы 1

Какой IP-адрес должен быть назначен компьютеру для входа в Web-интерфейс коммутатора?
2 года назад