D-Link DGS-1210-52/ME rev.B [405/519] Config time

DGS-1210/ME Metro Ethernet Switch CLI Reference Guide

387

To enable the SNTP function:

DGS-1210-28MP/ME:5# enable sntp

Command: enable sntp

Success.

DGS-1210-28MP/ME:5#

disable sntp

Purpose To disable SNTP server support.

Syntax

disable sntp

Description

The disable sntp command disables SNTP support.

Parameters None.

Restrictions Only administrator or operator level users can issue this command.

Example usage:

To disable SNTP support:

DGS-1210-28MP/ME:5# disable sntp

Command: disable sntp

Success.

DGS-1210-28MP/ME:5#

config time

Purpose To manually configure system time and date settings.

Syntax

config time <date> <systime>

Description

The config time date command configures the system time and

date settings. These will be overridden if SNTP is configured and

enabled.

Parameters

<date> –Specifies the date, using two numerical characters for the

day of the month, English abbreviation for the name of the month,

and four numerical characters for the year. For example: 19jan2011.

<systime > – Specifies the system time, using the format hh:mm:ss;

that is, two numerical characters each for the hour using a 24-hour

clock, the minute and second. For example: 19:42:30.

Restrictions Only administrator or operate-level users can issue this command.

Manually configured system time and date settings are overridden if

SNTP support is enabled.

Example usage:

To manually set system time and date settings: