D-Link DGS-1210-52/ME rev.B [210/519] Config traffic trap

DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide

192

Traffic Storm Control Trap : [None]

Port Thres Broadcast Multicast Unicast Action Count Time

hold Storm Storm Storm down Interval

---- ------- -------------- ------------- ---------- -------- -------- --------

1 64 Enabled Enabled Disabled Drop 0 0

2 64 Enabled Enabled Disabled Drop 0 0

3 64 Enabled Enabled Disabled Drop 0 0

Total Entries : 3

DGS-1210-28MP/ME:5#

config traffic trap

Purpose To configure the traffic control trap on the Switch.

Syntax

config traffic trap [storm_cleared | storm_occured | both | none]

Description

The config traffic trap command configures the current storm traffic

trap configuration on the Switch.

Parameters

storm_cleared – A notification will be generated when a storm event

is cleared.

storm_occured – A notification will be generated when a storm event

is detected.

both –

A notification will be generated both when a storm event is

detected and cleared.

none –

No notification will be generated when storm event is

detected or cleared.

Restrictions Only administrator or operator-level users can issue this command.

Example usage:

To configure traffic trap setting:

DGS-1210-28MP/ME:5# config traffic trap storm_cleared

Command: config traffic trap storm_cleared

Success.

DGS-1210-28MP/ME:5#